Product catalogue Terminals Screwing technology SAK-series modular terminals TS 35 Polyamide PA 6.6 Modular PE terminals General ordering data Order No. 0661260000 Part designation EK 6/35 Version Earth terminal, 6 mm, Screw connection, PA 66, green/yellow, TS 35 EAN 4008190096588 Qty. 100 pc(s). Additional technical data Colour of insulating material green/yellow Connection direction on side End plate required No Explosion-tested versionEx No Installation advice TS 35 Insulating material PA 66 Levels cross-connected internally No No. of identical terminals 1 No. of levels 1 No. of terminal strips per level 2 Open sides closed Operating temperature range - 50 C, + 100 C Product family SAK Series Type of connection Screwed Type of mounting Screwed UL 94 flammability rating of insulation material V2 Version PE terminal CSA rating data Min. cross-section (CSA) AWG 20 Max. cross-section (CSA) AWG 8 Conductors for clamping (additional connection) Flexible with ferrule, min. (DIN 46228 pt 1) 0.5 mm Flexible with ferrule, max. (DIN 46228 pt 1) 6 mm Conductors for clamping (rated connection) Clamping range, min. 0.5 mm Clamping range, max. 10 mm Type of connection Screw connection 2nd type of connection screwed - 1 -Product catalogue Terminals Screwing technology SAK-series modular terminals TS 35 Polyamide PA 6.6 Modular PE terminals Conductors for clamping (rated connection) Connection direction on side No. of connections 2 Stripping length 12 mm Clamping screw M 3.5 Blade size 4.0 x 0.8 mm Tightening torque range 0.8...1.6 Nm Gauge to IEC 60947-1 A5 Solid, min. 0.5 mm Solid, max. 10 mm Stranded, min. 1.5 mm Stranded, max. 6 mm Flexible, min. 0.5 mm Flexible, max. 10 mm Flexible with ferrule, min. (DIN 46228/1) 0.5 mm Flexible with ferrule, max. (DIN 46228/1) 6 mm AWG conductor size, min. AWG 20 AWG conductor size, max. AWG 8 AWG conductor size, min. 0.52 mm AWG conductor size, max. 8.37 mm Dimensions Width 8 mm Height of lowest version 44 mm Length 56.5 mm TS 35 offset 28.5 mm PE rating data Centre screw on PE terminals M 3 PEN function No Pollution severity 3 Rated cross-section 6 mm Rated impulse withstand voltage to adjacent 8 kV terminal Rated short-time current 720 A (6 mm) Rated voltage for adjacent terminal 800 V Standards IEC 60947-7-2 Tightening torque range for fixing screw 0.5...1.0 Nm Rating data Rated cross-section 6 mm Standards IEC 60947-7-2 Pollution severity 3 UL rating data Min. cross-section (UL) AWG 22 Max. cross-section (UL) AWG 8 - 2 -