Data sheet Weidmller Interface GmbH & Co. KG RS-SERIES Klingenbergstrae 26 RS 30 24VDC LD LP 1A D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Product image Similar to illustration Clip-on RS 30. 31. 32 relay bases are available in widths from 11.2 to 25 mm, depending on the type. The RSM relay multiplexers are available as 4, 8 and 16-way modules. To reduce the wiring work, the DC variants are fitted with a common plus or minus potential. The optional IEC603-1 plug-in connector enables the connection of pre-assembled lines. The screw connection system is used to connect the conductor with a rated cross-section of 2.5 mm. General ordering data Type RS 30 24VDC LD LP 1A Order No. 1101621001 Version RS-SERIES, Relay module, Number of contacts: 1 NO contact AgNi 0.15 gold flashed, Rated control voltage: 24 V DC 10 %, Continuous current: 6 A, Screw connection GTIN (EAN) 4032248022298 Qty. 10 pc(s). Creation date November 26, 2019 3:11:24 PM CET Catalogue status 22.11.2019 / We reserve the right to make technical changes. 1Data sheet Weidmller Interface GmbH & Co. KG RS-SERIES Klingenbergstrae 26 RS 30 24VDC LD LP 1A D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights Width 11.2 mm Width (inches) 0.441 inch Height 70 mm Height (inches) 2.756 inch Depth 56 mm Depth (inches) 2.205 inch Net weight 27.17 g Temperatures Humidity 40 C / 93 % rel. humidity, Operating temperature, max. no condensation 40 C Operating temperature, min. -25 C Storage temperature, max. 60 C Storage temperature, min. -40 C Operating temperature -25 C...40 C Storage temperature -40 C...60 C Input Rated control voltage 24 V DC 10 % Rated current DC 10 mA Power rating 0.45 W Pull-in/drop-out voltage, typ. 21.5 V DC Pull-in/drop-out current, typ. 12 mA / 3 mA DC Status indicator red LED Protective circuit Free-wheeling diode, Reverse polarity protection Output Rated switching voltage 250 V AC Max. switching voltage, AC 250 V Continuous current 6 A Inrush current 8 A AC switching capacity (resistive), max. 2000 VA Switch-on delay 8 ms Switch-off delay 7 ms Duration of Bounce 3 ms Min. switching power 250 mW Max. switching frequency at rated load 0.1 Hz Contact data Contact type 1 NO contact (AgNi 0.15 Electrical service life of AC coil 5 gold flashed) > 7x10 Switching cycles 5 6 Electrical service life, DC coil Mechanical service life > 5x10 switching cycles 20 x 10 switching cycles General data Version soldered relay Rail TS 32, TS 35 Test button No Mechanical switch position indicator No Colour orange Insulation coordination Rated voltage 250 V Surge voltage category III Pollution severity 2 Protection degree IP20 Creepage and clearance distance input Impulse withstand voltage output > 3 mm 4 kV Further details of approvals / standards Standards DIN EN 50178 Creation date November 26, 2019 3:11:24 PM CET Catalogue status 22.11.2019 / We reserve the right to make technical changes. 2