Data sheet Weidmller Interface GmbH & Co. KG Z-series Klingenbergstrae 16 ZDU 2.5 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Terminal blocks in tension clamp system and the Z Series are specially customised to the customers requirements. Less space, spacious labelling area, integrated test point, cross-connection functionality within the Z Series and another family of terminals by Weidmller. Z-Series terminals have a large clamping range and one or two cross-connection slots. Plug-in standard cross-connections enable potentials to be distributed over any number of terminals. General ordering data Type ZDU 2.5 Order No. 1608510000 Version Feed-through terminal, Tension clamp connection, 2.5 mm, 800 V, 24 A, Dark Beige GTIN (EAN) 4008190077969 Qty. 100 pc(s). Creation date February 22, 2016 1:26:16 PM CET Catalogue status 05.02.2015 / We reserve the right to make technical changes. 1Data sheet Weidmller Interface GmbH & Co. KG Z-series Klingenbergstrae 16 ZDU 2.5 D-32758 Detmold Germany Fon: +49 5231 14-0 Fax: +49 5231 14-292083 www.weidmueller.com Technical data Dimensions and weights Width 5.1 mm Width (inches) 0.201 inch Height 59.5 mm Height (inches) 2.343 inch Depth 38.5 mm Depth (inches) 1.516 inch Depth including DIN rail 39.5 mm Net weight 6.925 g Temperatures Continuous operating temp., min. -50 C Continuous operating temp., max. 120 C Material data Material Wemid Colour Dark Beige UL 94 flammability rating V-0 Rating data IECEx/ATEX Certificate No. (ATEX) KEMA97ATEX2521U Certificate No. (IECEX) IECEXULD05.0009U Max. voltage (ATEX) 550 V Current (ATEX) 21 A Wire cross section max. (ATEX) 2.5 mm Max. voltage (IECEX) 550 V Current (IECEX) 20 A Wire cross section max. (IECEX) 2.5 mm Voltage, cross-connection Operating temperature range For operating temperature range see EC Design Test Certificate / IEC Ex- CrossConnectionGuide.pdf Certificate of Conformity Marking EN 60079-7 Ex e II Marking ATEX Directive 94/9/EC II 2 G D System specifications Version Tension-clamp connection, End cover plate required for plug-in cross-connector, One end without connector Yes Number of levels 1 No. of clamping points per level 2 Levels cross-connected internally No PE connection No Mounting rail TS 35 Additional technical data Explosion-tested version Yes Number of similar terminals 1 Open sides right Type of mounting Snap-on CSA rating data Certificate No. (CSA) 200039-1152892 Current size B (CSA) 27 A Current size C (CSA) 27 A Current size D (CSA) 5 A Voltage size B (CSA) 600 V Voltage size C (CSA) 600 V Voltage size D (CSA) 600 V Wire cross section max. (CSA) 12 AWG Wire cross section min. (CSA) 26 AWG Creation date February 22, 2016 1:26:16 PM CET Catalogue status 05.02.2015 / We reserve the right to make technical changes. 2