FKP0C003300B00HSSD WIMA

D WIMA FKP 02 Polypropylene (PP) Film/Foil Capacitors for Pulse Applications in PCM 2.5 mm. Capacitances from 100 pF to 0.01 mF. Rated Voltages from 63 VDC to 400 VDC. Special Features Electrical Data Pulse duty construction Capacitance range: Dielectric absorption: PCM 2.5 mm 100 pF to 0.01 mF (E12-values on request) 0.05% Close tolerances up to 2.5% Rated voltages: Temperature coefficient: -6 Very low dissipation factor 63 VDC, 100 VDC, 250 VDC, 400 VDC 200 x 10 /+ C (typical) Negative capacitance change Capacitance tolerances: Dissipation factors at +20+ C: tan d versus temperature 20%, 10%, 5%, 2.5% at f C 0.01 mF Very low dielectric absorption Operating temperature range: -4 1 kHz 5 x 10 According to RoHS 2011/65/EU 55+ C to +100+ C -4 10 kHz 6 x 10 Test specifications: -4 100 kHz 8 x 10 In accordance with IEC 60384-13 Typical Applications Climatic test category: Voltage derating: 55/100/21 in accordance with IEC For high frequency applications e.g. A voltage derating factor of 1.35 % per K Insulation resistance at +20+ C: Sample and hold must be applied from +85+ C for DC 5 3 x 10 M Timing voltages and from +75+ C for AC Measuring voltage: LC-Filtering voltages. U = 63 V: U = 50 V/1 min. Oscillating circuits r test Reliability: U 100 V: U = 100 V/1 min. Audio equipment r test Operational life 300 000 hours Test voltage: 2 U , 2 sec. r Failure rate 5 fit (0.5 x U and 40+ C) r Maximum pulse rise time: Construction 1000 V/msec. Dielectric: Polypropylene (PP) film Capacitor electrodes: Metal foil Internal construction: Mechanical Tests Packing Plastic film Pull test on pins: Available taped and reeled. Metal foil electrode 10 N in direction of pins according to Terminating wire IEC 60068-2-21 Detailed taping information and graphs Vibration: at the end of the catalogue. 6 hours at 10 ... 2000 Hz and 0.75 mm displacement amplitude or 10 g in accordance with IEC 60068-2-6 Encapsulation: Low air density: Solvent-resistant, flame-retardant plastic 1kPa = 10 mbar in accordance with case with epoxy resin seal, UL 94 V-0 IEC 60068-2-13 Terminations: Bump test: 2 Tinned wire. 4000 bumps at 390 m/sec in For further details and graphs please Marking: accordance with IEC 60068-2-29 refer to Technical Information. Colour: Red. Marking: Black. 27 06.21-- 100 pF -- 220 pF -- 470 pF -- 1000 pF -- 4700 pF -- 6800 pF -- 0.01 F D WIMA FKP 02 Continuation General Data 63 VDC/40 VAC* 100 VDC/63 VAC* Capacitance W H L PCM** Part number W H L PCM** Part number 100 pF 2.5 7 4.6 2.5 FKP0C001000B00 2.5 7 4.6 2.5 FKP0D001000B00 150 2.5 7 4.6 2.5 FKP0C001500B00 2.5 7 4.6 2.5 FKP0D001500B00 220 2.5 7 4.6 2.5 FKP0C002200B00 2.5 7 4.6 2.5 FKP0D002200B00 330 2.5 7 4.6 2.5 FKP0C003300B00 2.5 7 4.6 2.5 FKP0D003300B00 470 2.5 7 4.6 2.5 FKP0C004700B00 2.5 7 4.6 2.5 FKP0D004700B00 680 2.5 7 4.6 2.5 FKP0C006800B00 2.5 7 4.6 2.5 FKP0D006800B00 1000 pF 2.5 7 4.6 2.5 FKP0C011000B00 2.5 7 4.6 2.5 FKP0D011000B00 1500 2.5 7 4.6 2.5 FKP0C011500B00 2.5 7 4.6 2.5 FKP0D011500B00 2200 3 7.5 4.6 2.5 FKP0C012200C00 3 7.5 4.6 2.5 FKP0D012200C00 3300 3.8 8.5 4.6 2.5 FKP0C013300D00 3.8 8.5 4.6 2.5 FKP0D013300D00 4700 4.6 9 4.6 2.5 FKP0C014700E00 4.6 9 4.6 2.5 FKP0D014700E00 6800 4.6 9 4.6 2.5 FKP0C016800E00 4.6 9 4.6 2.5 FKP0D016800E00 0.01 mF 5.5 10 4.6 2.5 FKP0C021000F00 5.5 10 4.6 2.5 FKP0D021000F00 250 VDC/160 VAC* 400 VDC/200 VAC* Capacitance W H L PCM** Part number W H L PCM** Part number 100 pF 2.5 7 4.6 2.5 FKP0F001000B00 2.5 7 4.6 2.5 FKP0G001000B00 150 2.5 7 4.6 2.5 FKP0F001500B00 2.5 7 4.6 2.5 FKP0G001500B00 220 2.5 7 4.6 2.5 FKP0F002200B00 2.5 7 4.6 2.5 FKP0G002200B00 330 2.5 7 4.6 2.5 FKP0F003300B00 2.5 7 4.6 2.5 FKP0G003300B00 470 2.5 7 4.6 2.5 FKP0F004700B00 2.5 7 4.6 2.5 FKP0G004700B00 680 2.5 7 4.6 2.5 FKP0F006800B00 3 7.5 4.6 2.5 FKP0G006800C00 1000 pF 2.5 7 4.6 2.5 FKP0F011000B00 3.8 8.5 4.6 2.5 FKP0G011000D00 1500 3 7.5 4.6 2.5 FKP0F011500C00 4.6 9 4.6 2.5 FKP0G011500E00 2200 3.8 8.5 4.6 2.5 FKP0F012200D00 4.6 9 4.6 2.5 FKP0G012200E00 3300 4.6 9 4.6 2.5 FKP0F013300E00 5.5 10 4.6 2.5 FKP0G013300F00 4700 5.5 10 4.6 2.5 FKP0F014700F00 * AC voltage: f 400 Hz 1.4 x U + UDC U rms r ** PCM = Printed circuit module = pin spacing 10 Dims. in mm. Z 1 Part number completion: 7 5 W L Tolerance: 20 % = M 3 10 % = K H 5 % = J 0.1 2.5 % = H 7 d = 0.4 l 6 -2 5 Packing: bulk = S 3 d Pin length: 6-2 = SD 2.5 PCM Taped version see page 161. 0.01 at the pin exit points 1135 730 57100 1000 (0 .5) f/MHz Impedance change with frequency (general guide). Rights reserved to amend design data without prior notification. The values of the WIMA FKS 02 and WIMA FKM 02 ranges according to the main catalogue 2009 are still available on request. 28 06.21