D
WIMA FKP 1
Polypropylene (PP) Capacitors for Pulse Applications with Metal Foil
Electrodes and Metallized Internal Series Connection in PCM 15 mm to 52.5 mm.
Capacitances from 100 pF to 4.7 mF. Rated Voltages from 400 VDC to 6000 VDC.
Special Features Electrical Data
Extremely high pulse duty Capacitance range: Insulation resistance at +20+ C:
5
Self-healing 100 pF to 4.7 mF (E12-values on request) C T 0.1 mF: 1 x 10 M
5
Internal series connection Rated voltages: (mean value: 5 x 10 M)
Very low dissipation factor 400 VDC, 630 VDC, 850 VDC, 1000 VDC, C 0.1 mF: 30 000 sec (M x mF)
Negative capacitance change 1250 VDC, 1600 VDC, 2000 VDC, (mean value: 100 000 sec)
versus temperature 4000 VDC, 6000 VDC Measuring voltage: 100 V/1 min.
According to RoHS 2011/65/EU Capacitance tolerances: Voltage derating:
20%, 10%, 5% (other tolerances are A voltage derating factor of 1.35 % per K
available subject to special enquiry) must be applied from +85+ C for DC
Typical Applications
Operating temperature range: voltages and from +75+ C for AC
55+ C to +100+ C voltages
For high pulse and high frequency
Climatic test category: Reliability:
applications e.g.
55/100/56 in accordance with IEC Operational life 300 000 hours
Switch mode power supplies
Test voltage: Failure rate 1 fit (0.5 x U
and 40+ C)
Converters in drives and power r
2 U , 2 sec / 6 kV: 1.6 U , 2 sec.
r r
electronics
Dielectric absorption: 0.05 %
Deflection systems in monitors
Dissipation factors at +20+ C: tan d
and TV-sets
Electronic ballasts
at f C T 0.1 mF 0.1 mF C T 1.0 mF C 1.0 mF
-4 -4 -4
1 kHz T 6 x10 T 6 x 10 T 6 x 10
Construction
-4 -4
10 kHz T 6 x10 T 6 x 10
-4
100 kHz T 10 x 10
Dielectric:
Maximum pulse rise time: for pulses equal to the rated voltage
Polypropylene (PP) film
Capacitor electrodes:
Capacitance max. pulse rise time V/msec at T < 40) C
A
Aluminium foil and double-sided metallized
pF/mF 400 VDC 630 VDC 850 VDC 1000 VDC 1250 VDC 1600 VDC 2000 VDC 4000 VDC 6000 VDC
plastic film
100 ... 220 56000 56000
Internal construction:
330 ... 680 51000 56000 56000 56000 56000
1000 ... 2200 29000 29000 2900 29000 29000 46000 51000 51000 51000
Plastic film
3300 ... 6800 9000 14000 2700 27000 29000 29000 29000 29000 29000
Metal foil electrode
0.01 ... 0.022 9000 11000 1100 11000 11000 11000 13000 13000 13000
Electrode carrier
plastic film metallized
0.033 ... 0.068 9000 11000 1100 11000 11000 11000 11000 13000 13000
on both sides
0.1 ... 0.22 7000 11000 1100 11000 11000 11000 11000 13000 13000
Metal contact layer
(schoopage) 0.33 ... 0.68 6000 10000 1100 11000 11000 11000 11000
Terminating wire 1.0 ... 2.2 5000 6600 8300 8300 9500 11000
3.3 ... 4.7 2500
Encapsulation:
Mechanical Tests Packing
Solvent-resistant, flame-retardant plastic
case with epoxy resin seal, UL 94 V-0
Pull test on pins: Available taped and reeled up to and
Terminations:
d T 0.8 l: 10 N in direction of pins including case size 15 x 26 x 31.5 /
Tinned wire.
d > 0.8 l: 20 N in direction of pins PCM 27.5 mm.
Marking:
according to IEC 60068-2-21
Colour: Red. Marking: Black.
Vibration: Detailed taping information and graphs
Epoxy resin seal: Yellow
6 hours at 10 ... 2000 Hz and 0.75 mm at the end of the catalogue.
displacement amplitude or 10 g in
accordance with IEC 60068-2-6
Low air density:
1kPa = 10 mbar in accordance with
IEC 60068-2-13
Bump test:
2
4000 bumps at 390 m/sec For further details and graphs please
in accordance with IEC 60068-2-29 refer to Technical Information.
73
07.16D
WIMA FKP 1
Continuation
General Data
400 VDC/250 VAC* 630 VDC/400 VAC*
Capacitance
W H L PCM** Part number W H L PCM** Part number
1000 pF 5 11 18 15 FKP1G011004B_ _ _ _ _ _ 5 11 18 15 FKP1J011004B_ _ _ _ _ _
1500 5 11 18 15 FKP1G011504B_ _ _ _ _ _ 5 11 18 15 FKP1J011504B_ _ _ _ _ _
2200 5 11 18 15 FKP1G012204B_ _ _ _ _ _ 5 11 18 15 FKP1J012204B_ _ _ _ _ _
3300 5 11 18 15 FKP1G013304B_ _ _ _ _ _ 5 11 18 15 FKP1J013304B_ _ _ _ _ _
4700 5 11 18 15 FKP1G014704B_ _ _ _ _ _ 5 11 18 15 FKP1J014704B_ _ _ _ _ _
6800 5 11 18 15 FKP1G016804B_ _ _ _ _ _ 6 12.5 18 15 FKP1J016804C_ _ _ _ _ _
0.01 mF 5 11 18 15 FKP1G021004B_ _ _ _ _ _ 7 14 18 15 FKP1J021004D_ _ _ _ _ _
5 14 26.5 22.5 FKP1J021005A_ _ _ _ _ _
0.015 6 12.5 18 15 FKP1G021504C_ _ _ _ _ _ 8 15 18 15 FKP1J021504F_ _ _ _ _ _
6 15 26.5 22.5 FKP1J021505B_ _ _ _ _ _
0.022 7 14 18 15 FKP1G022204D_ _ _ _ _ _ 7 16.5 26.5 22.5 FKP1J022205D_ _ _ _ _ _
5 14 26.5 22.5 FKP1G022205A_ _ _ _ _ _
0.033 8 15 18 15 FKP1G023304F_ _ _ _ _ _ 8.5 18.5 26.5 22.5 FKP1J023305F_ _ _ _ _ _
6 15 26.5 22.5 FKP1G023305B_ _ _ _ _ _
0.047 7 16.5 26.5 22.5 FKP1G024705D_ _ _ _ _ _ 10.5 20.5 26.5 22.5 FKP1J024705H_ _ _ _ _ _
9 19 31.5 27.5 FKP1J024706A_ _ _ _ _ _
0.068 8.5 18.5 26.5 22.5 FKP1G026805F_ _ _ _ _ _ 11 21 31.5 27.5 FKP1J026806B_ _ _ _ _ _
9 19 41.5 37.5 FKP1J026807A_ _ _ _ _ _
0.1 mF 10.5 20.5 26.5 22.5 FKP1G031005H_ _ _ _ _ _ 13 24 31.5 27.5 FKP1J031006D_ _ _ _ _ _
9 19 31.5 27.5 FKP1G031006A_ _ _ _ _ _ 11 22 41.5 37.5 FKP1J031007B_ _ _ _ _ _
0.15 11 21 31.5 27.5 FKP1G031506B_ _ _ _ _ _ 13 24 41.5 37.5 FKP1J031507C_ _ _ _ _ _
0.22 13 24 31.5 27.5 FKP1G032206D_ _ _ _ _ _ 15 26 41.5 37.5 FKP1J032207D_ _ _ _ _ _
11 22 41.5 37.5 FKP1G032207B_ _ _ _ _ _
0.33 13 24 41.5 37.5 FKP1G033307C_ _ _ _ _ _ 19 32 41.5 37.5 FKP1J033307F_ _ _ _ _ _
0.47 17 29 41.5 37.5 FKP1G034707E_ _ _ _ _ _ 20 39.5 41.5 37.5 FKP1J034707G_ _ _ _ _ _
0.68 19 32 41.5 37.5 FKP1G036807F_ _ _ _ _ _ 24 45.5 41.5 37.5 FKP1J036807H_ _ _ _ _ _
1.0 mF 20 39.5 41.5 37.5 FKP1G041007G_ _ _ _ _ _ 35 50 41.5 37.5 FKP1J041007J_ _ _ _ _ _
1.5 31 46 41.5 37.5 FKP1G041507I_ _ _ _ _ _ 40 55 41.5 37.5 FKP1J041507K_ _ _ _ _ _
35 50 57 52.5 FKP1J041509F_ _ _ _ _ _
2.2 35 50 41.5 37.5 FKP1G042207J_ _ _ _ _ _ 45 55 57 52.5 FKP1J042209H_ _ _ _ _ _
3.3 35 50 57 52.5 FKP1G043309F_ _ _ _ _ _
4.7 45 65 57 52.5 FKP1G044709J_ _ _ _ _ _
* AC voltages: f T 1000 Hz; 1.4 x U + UDC T U
rms r
New values
Part number completeion:
Version code: 2-pin = 00
** PCM = Printed circuit module = pin spacing
4-pin = D4
Tolerance: 20 % = M
Dims. in mm.
10 % = K
5 % = J
The values of the WIMA FKP 4 range according to
Packing: bulk = S
main catalogue 2015 are still available on request.
Pin length: 6-2 = SD
Ionisation inception level in isolated cases may
Taped version see page 145.
be lower than admissible rated AC voltage.
Rights reserved to amend design data without prior notification.
Continuation page 75
74
04.16
