FKS2D016801A00MSSD WIMA

D WIMA FKS 2 Polyester (PET) Film/Foil Capacitors for Pulse Applications in PCM 5 mm. Capacitances from 1000 pF to 0.047 mF. Rated Voltages from 63 VDC to 630 VDC. Special Features Electrical Data Pulse duty construction Capacitance range: Dissipation factors at +20+ C: tan d According to RoHS 2011/65/EU 1000 pF to 0.047 mF at f C 0.047 mF (E12-values on request) -3 1 kHz 7 x 10 Rated voltages: Typical Applications -3 10 kHz 15 x 10 63 VDC, 100 VDC, 250 VDC, 400 VDC, -3 100 kHz 20 x 10 630 VDC For general DC-applications e.g. Capacitance tolerances: Coupling Voltage derating: 20%, 10%, 5% Decoupling A voltage derating factor of 1.25 % per K Operating temperature range: must be applied from +85+ C for DC 55+ C to +100+ C voltages and from +75+ C for AC Construction Test specifications: voltages. In accordance with IEC 60384-11 Reliability: Dielectric: Climatic test category: Operational life 300 000 hours Polyethylene-terephthalate (PET) film 55/100/56 in accordance with IEC Failure rate 5 fit (0.5 x U and 40+ C) Capacitor electrodes: r Insulation resistance at +20+ C: Metal foil 4 3 x 10 M Internal construction: 5 (mean value: 8 x 10 M) Measuring voltage: 100 V/1 min. Test voltage: 2 U , 2 sec. r Maximum pulse rise time: Plastic film 1000 V/msec for pulses equal to the Metal foil electrode rated voltage Terminating wire Mechanical Tests Packing Encapsulation: Solvent-resistant, flame-retardant plastic case with epoxy resin seal, UL 94 V-0 Pull test on pins: Available taped and reeled. Terminations: 10 N in direction of pins according to Tinned wire. IEC 60068-2-21 Detailed taping information and graphs Marking: Vibration: at the end of the catalogue. Colour: Red. Marking: Silver. 6 hours at 10 ... 2000 Hz and 0.75 mm Epoxy resin seal: Yellow. displacement amplitude or 10 g in accordance with IEC 60068-2-6 Low air density: 1kPa = 10 mbar in accordance with IEC 60068-2-13 Bump test: 2 4000 bumps at 390 m/sec in For further details and graphs please accordance with IEC 60068-2-29 refer to Technical Information. 32 04.16D WIMA FKS 2WIMA FKP 4 Continuation General Data 63 VDC/40 VAC* 100 VDC/63 VAC* Capacitance W H L PCM** Part number W H L PCM** Part number 1000 pF 2.5 6.5 7.2 5 FKS2C011001A00 2.5 6.5 7.2 5 FKS2D011001A00 1500 2.5 6.5 7.2 5 FKS2C011501A00 2.5 6.5 7.2 5 FKS2D011501A00 2200 2.5 6.5 7.2 5 FKS2C012201A00 2.5 6.5 7.2 5 FKS2D012201A00 3300 2.5 6.5 7.2 5 FKS2C013301A00 2.5 6.5 7.2 5 FKS2D013301A00 4700 2.5 6.5 7.2 5 FKS2C014701A00 2.5 6.5 7.2 5 FKS2D014701A00 6800 2.5 6.5 7.2 5 FKS2C016801A00 2.5 6.5 7.2 5 FKS2D016801A00 0.01 mF 3 7.5 7.2 5 FKS2C021001B00 3 7.5 7.2 5 FKS2D021001B00 0.015 3.5 8.5 7.2 5 FKS2C021501C00 3.5 8.5 7.2 5 FKS2D021501C00 0.022 4.5 9.5 7.2 5 FKS2C022201E00 4.5 9.5 7.2 5 FKS2D022201E00 0.033 5.5 11.5 7.2 5 FKS2C023301H00 5.5 11.5 7.2 5 FKS2D023301H00 0.047 7.2 13 7.2 5 FKS2C024701K00 7.2 13 7.2 5 FKS2D024701K00 250 VDC/160 VAC* 400 VDC/200 VAC* Capacitance W H L PCM** Part number W H L PCM** Part number 1000 pF 2.5 6.5 7.2 5 FKS2F011001A00 2.5 6.5 7.2 5 FKS2G011001A00 1500 2.5 6.5 7.2 5 FKS2F011501A00 2.5 6.5 7.2 5 FKS2G011501A00 2200 2.5 6.5 7.2 5 FKS2F012201A00 2.5 6.5 7.2 5 FKS2G012201A00 3300 2.5 6.5 7.2 5 FKS2F013301A00 2.5 6.5 7.2 5 FKS2G013301A00 4700 2.5 6.5 7.2 5 FKS2F014701A00 2.5 6.5 7.2 5 FKS2G014701A00 6800 2.5 6.5 7.2 5 FKS2F016801A00 3 7.5 7.2 5 FKS2G016801B00 0.01 mF 3 7.5 7.2 5 FKS2F021001B00 3.5 8.5 7.2 5 FKS2G021001C00 0.015 3.5 8.5 7.2 5 FKS2F021501C00 4.5 9.5 7.2 5 FKS2G021501E00 0.022 4.5 9.5 7.2 5 FKS2F022201E00 5.5 11.5 7.2 5 FKS2G022201H00 0.033 5.5 11.5 7.2 5 FKS2F023301H00 7.2 13 7.2 5 FKS2G023301K00 0.047 7.2 13 7.2 5 FKS2F024701K00 630 VDC/250 VAC* Capacitance W H L PCM** Part number 1000 pF 3 7.5 7.2 5 FKS2J011001B00 1500 3 7.5 7.2 5 FKS2J011501B00 2200 3 7.5 7.2 5 FKS2J012201B00 3300 3 7.5 7.2 5 FKS2J013301B00 4700 3.5 8.5 7.2 5 FKS2J014701C00 6800 4.5 9.5 7.2 5 FKS2J016801E00 0.01 mF 4.5 9.5 7.2 5 FKS2J021001E00 0.015 5.5 11.5 7.2 5 FKS2J021501H00 0.022 7.2 13 7.2 5 FKS2J022201K00 * AC voltage: f = 50 Hz 1.4 x U + UDC U rms r Impedance change with frequency New ranges (general guide). W L ** PCM = Printed circuit module = pin spacing Part number completion: H Dims. in mm. Tolerance: 20 % = M d = 0.5 l 10 % = K -2 6 5 % = J d Packing: bulk = S 5 PCM Pin length: 6-2 = SD at thepin exit points Taped version see page 145. (0 .5) Rights reserved to amend design data without prior notification. 33 04.16