FKS2G014701A00JO00 WIMA

D WIMA FKS 2 Polyester (PET) Film and Foil Capacitors for Pulse Applications in PCM 5 mm Special Features Electrical Data Pulse duty construction Capacitance range: Dissipation factors at +20+ C: tan d According to RoHS 2002/95/EC 1000 pF to 0.047 mF (E12-values on request) at f C 0.047 mF Rated voltages: -3 1 kHz 7 x 10 100 VDC, 250 VDC, 400 VDC Typical Applications -3 10 kHz 15 x 10 Capacitance tolerances: -3 100 kHz 20 x 10 20%, 10%, 5% For general DC-applications e.g. Operating temperature range: Coupling Voltage derating: 55+ C to +100+ C Decoupling A voltage derating factor of 1.25 % per K Test specifications: must be applied from +85+ C for DC In accordance with IEC 60384-11 voltages and from +75+ C for AC Construction and EN 130 100 voltages. Climatic test category: Reliability: Dielectric: 55/100/56 in accordance with IEC Operational life 300 000 hours Polyethylene-terephthalate (PET) film Insulation resistance at +20+ C: Failure rate 5 fit (0.5 x U and 40+ C) Capacitor electrodes: r 4 3 x 10 M Metal foil 5 (mean value: 8 x 10 M) Internal construction: Measuring voltage: 100 V/1 min. Test voltage: 2 U , 2 sec. r Maximum pulse rise time: 1000 V/msec for pulses equal to the Plastic film rated voltage Metal foil electrode Terminating wire Mechanical Tests Packing Encapsulation: Solvent-resistant, flame-retardant plastic case with epoxy resin seal, UL 94 V-0 Pull test on leads: Available taped and reeled. Terminations: 10 N in direction of leads according to Tinned wire. IEC 60068-2-21 Detailed taping information and graphs Marking: Vibration: at the end of the catalogue. Colour: Red. Marking: Silver. 6 hours at 10 ... 2000 Hz and 0.75 mm Epoxy resin seal: Yellow. displacement amplitude or 10 g in accordance with IEC 60068-2-6 Low air density: 1kPa = 10 mbar in accordance with IEC 60068-2-13 Bump test: 2 4000 bumps at 390 m/sec in For further details and graphs please accordance with IEC 60068-2-29 refer to Technical Information. 28 11.10D WIMA WIMA FKS FKP 42 Continuation General Data 100 VDC/63 VAC* 250 VDC/160 VAC* Capacitance W H L PCM** Part number W H L PCM** Part number 1000 pF 2.5 6.5 7.2 5 FKS2D011001A00 2.5 6.5 7.2 5 FKS2F011001A00 1500 2.5 6.5 7.2 5 FKS2D011501A00 2.5 6.5 7.2 5 FKS2F011501A00 2200 2.5 6.5 7.2 5 FKS2D012201A00 2.5 6.5 7.2 5 FKS2F012201A00 3300 2.5 6.5 7.2 5 FKS2D013301A00 2.5 6.5 7.2 5 FKS2F013301A00 4700 2.5 6.5 7.2 5 FKS2D014701A00 2.5 6.5 7.2 5 FKS2F014701A00 6800 2.5 6.5 7.2 5 FKS2D016801A00 2.5 6.5 7.2 5 FKS2F016801A00 0.01 mF 3 7.5 7.2 5 FKS2D021001B00 3 7.5 7.2 5 FKS2F021001B00 0.015 3.5 8.5 7.2 5 FKS2D021501C00 3.5 8.5 7.2 5 FKS2F021501C00 0.022 4.5 9.5 7.2 5 FKS2D022201E00 4.5 9.5 7.2 5 FKS2F022201E00 0.033 5.5 11.5 7.2 5 FKS2D023301H00 5.5 11.5 7.2 5 FKS2F023301H00 0.047 7.2 13 7.2 5 FKS2D024701K00 7.2 13 7.2 5 FKS2F024701K00 400 VDC/200 VAC* Capacitance W H L PCM** Part number 1000 pF 2.5 6.5 7.2 5 FKS2G011001A00 1500 2.5 6.5 7.2 5 FKS2G011501A00 2200 2.5 6.5 7.2 5 FKS2G012201A00 3300 2.5 6.5 7.2 5 FKS2G013301A00 4700 2.5 6.5 7.2 5 FKS2G014701A00 6800 3 7.5 7.2 5 FKS2G016801B00 0.01 mF 3.5 8.5 7.2 5 FKS2G021001C00 0.015 4.5 9.5 7.2 5 FKS2G021501E00 0.022 5.5 11.5 7.2 5 FKS2G022201H00 0.033 7.2 13 7.2 5 FKS2G023301K00 * AC voltage: f = 50 Hz 1.4 x U + UDC U rms r ** PCM = Printed circuit module = lead spacing Impedance change with frequency (general guide). Dims. in mm. The values of the WIMA FKM 2 range according to the main catalogue 2009 are still available on request. Part number completion: Tolerance: 20 % = M 10 % = K W 5 % = J L Packing: bulk = S Lead length: 6-2 = SD H d = 0.5 l Taped version see page 127. 6 -2 d 5 PCM at the lead exit points ( 0.5) Rights reserved to amend design data without prior notification. 29 11.10