D WIMA MP 3-X1 Metallized Paper (MP) RFI-Capacitors Class X1 in PCM 10 mm to 15 mm. Capacitances from 1000 pF to 0.033 mF. Rated Voltages from 300 VAC to 500 VAC. Special Features Electrical Data Particularly high reliability against Capacitance range: Test specifications: active and passive flammability 1000 pF to 0.033 mF (E12-values on request) In accordance with IEC 60384-14 Excellent self-healing as well as Rated voltages: Maximum pulse rise time: high voltage strength 300 VAC, 440 VAC, 500 VAC Capacitance Pulse rise time V/msec High degree of interference Continuous DC voltage* (general guide): pF/mF max. operation suppression due to good T 730 V for 300 VAC 1000 ... 4700 2500 attenuation and low ESR T 850 V for 440 VAC and 500 VAC 6800 ... 0.022 1750 For temperatures up to +110 C Capacitance tolerances: 20% 0.033 750 According to RoHS 2011/65/EU Operating temperature range: 40) C to +110) C for pulses equal to a voltage amplitude Climatic test category: Typical Applications with 2 x 300 VAC = 425 V, 40/110/56/C in accordance with IEC with 2 x 440 VAC = 623 V, Insulation resistance at +20+ C: Class X1 RFI applications to meet with 2 x 500 VAC = 707 V 3 12 x 10 M EMC regulations according to IEC 60384-14 Measuring voltage: Capacitors connected to the mains Test voltage: 2300 VDC, 2 sec. 100 V/1 min. for 300 VAC and 440 VAC between phase and neutral or Reliability: 500 V/1 min. for 500 VAC phase and phase conductors Operational life 300 000 hours Dissipation factors: High peak voltage applications, Failure rate 1 fit (0.5 x U and 40) C) r 3 tan d T 13 x 10 at 1 kHz and +20+ C pulse peak voltage T 4 kV Approvals: Construction Authority Specification Symbol Approval-No UL/Demko EN 60384-14 ENEC-02830 (300 VAC) 5 Dielectric: ENEC-02831(440/500 VAC) Paper, epoxy resin impregnated UL UL 60384-14 E 100438 Capacitor electrodes: CAN/CSA-E60384-14 Vacuum-deposited Internal construction: Mounting Recommendation Packing Capacitor paper Vacuum-deposited electrode To minimize or avoid shock and/or Available taped and reeled. Metal contact layer vibration stresses to terminating wires (schoopage) and solder connections we recommend to Detailed taping information and graphs Terminating wire fix voluminous resin-potted MP capacitors at the end of the catalogue. as from e.g. PCM 22.5 mm in an appropriate way since for constructional For further details and graphs please reasons they do not sit tight on the refer to Technical Information. Encapsulation: board. Self-extinguishing epoxy resin, UL 94 V-0, metal foil * If safety-approved EMI suppression Terminations: capacitors are operated with a DC vol- Tinned wire. tage being above the specified AC voltage Marking: rating the given approvals are no longer Marking: Black on Silver. valid (IEC 60384-14). Furthermore the permissible pulse rise time du/dt (F ) will be subject to a reduction max. according to F = F x 2 x UAC / UDC max. r if the DC operating voltage UDC is higher than 2 x UAC 104 06.21D WIMA MP 3-X1 Continuation General Data 300 VAC* 440 VAC* Capacitance W H L PCM** Part number W H L PCM** Part number 1000 pF 4 8.5 13.5 10 MPX12W1100FA00 1500 4 8.5 13.5 10 MPX12W1150FA00 2200 4 8.5 13.5 10 MPX12W1220FA00 3300 4 8.5 13.5 10 MPX12W1330FA00 4700 5 10 13.5 10 MPX12W1470FB00 6800 5 13 19 15 MPX12W1680FC00 5 13 19 15 MPX14W1680FC00 0.01 mF 5 13 19 15 MPX12W2100FC00 5 13 19 15 MPX14W2100FC00 0.015 6 14 19 15 MPX12W2150FD00 6 14 19 15 MPX14W2150FD00 0.022 7 15 19 15 MPX12W2220FE00 7 15 19 15 MPX14W2220FE00 0.033 8 17 19 15 MPX12W2330FF00 10 18 19 15 MPX14W2330FG00 500 VAC* Part number completion: Capacitance W H L PCM** Part number Tolerance: 20 % = M 6800 pF 5 13 19 15 MPX15W1680FC00 Packing: bulk = S 0.01 mF 5 13 19 15 MPX15W2100FC00 Pin length: 6-2 = SD 0.015 6 14 19 15 MPX15W2150FD00 Taped version see page 161. 0.022 7 15 19 15 MPX15W2220FE00 0.033 10 18 19 15 MPX15W2330FG00 * f = 50/60 Hz W L ** PCM = Printed circuit module = pin spacing Upon request with long pins 35-2 mm max. H Dims in mm. d = 0.6 l if PCM10 6-2 d = 0.8 l if PCM 15 d PCM at the pin exit points Rights reserved to amend design (0.5) data without prior notification. C/C(%) -3 tan (x 10 ) 12 40 Typical Graphs of the 36 8 32 Capacitor Paper Dielectric 28 4 24 0 20 16 valid for: -4 12 8 -8 MP 3-X2 4 -12 0 -55 -40 -20 020406080 100 -55 -40 -20 020406080 100 MP 3-X1 T( C) T( C) Capacitance change versus temperature Dissipation factor change versus MP 3-Y2 / 3R-Y2 (f =1 kHz) (general guide) temperature (f = 1 kHz) (general guide) -3 Mx F(s) tan (x 10 ) 4 30 10 26 22 18 3 10 14 10 6 2 2 10 0 23 45 6 -55 -40 -20 020406080 100 10 10 10 10 10 T( C) f/Hz Insulation resistance change versus Dissipation factor change versus temperature (general guide) frequency (general guide). 105 06.21