MPX21W4100FM00MSSD WIMA

D WIMA MP 3-X2 Metallized Paper (MP) RFI-Capacitors Class X2 in PCM 10 mm to 22.5 mm. Capacitances from 1000 pF to 0.33 mF. Rated Voltages 250 VAC and 275 VAC. Special Features Electrical Data Particularly high reliability against Capacitance range: Maximum pulse rise time: active and passive flammability 1000 pF to 0.33 mF (E12-values on request) Capacitance Pulse rise time V/msec Excellent self-healing as well as Rated voltages: 250 VAC, 275 VAC pF/mF max. operation high voltage strength Continuous DC voltage* (general guide): 1000 ... 0.068 1500 High degree of interference T 630 V 0.1 ... 0.33 750 suppression due to good Capacitance tolerances: 20% attenuation and low ESR Operating temperature range: for pulses equal to a voltage amplitude For temperatures up to +110 C 40) C to +110) C with 2 x UAC = 390 V According to RoHS 2011/65/EU Climatic test category: according to IEC 60384-14 40/110/56/C in accordance with IEC Test voltage: 1300 VDC, 2 sec. Insulation resistance at +20+ C: Typical Applications Reliability: 3 12 x 10 M Operational life 300 000 hours Measuring voltage: 100 V/1 min. Class X2 RFI applications to meet Failure rate 1 fit (0.5 x U and 40) C) r Dissipation factors: EMC regulations 3 tan d T 13 x 10 at 1 kHz and +20+ C Capacitors connected to the mains Test specifications: between phase and neutral or In accordance with IEC 60384-14 phase and phase conductors Approvals: General requirements, pulse peak voltage T 2.5 kV Authority Specification Symbol Approval-No. UL/Demko EN 60384-14 ENEC-02832 5 Construction UL UL 60384-14 E 100438 Dielectric: CAN/CSA-E60384-14 Paper, epoxy resin impregnated Capacitor electrodes: Vacuum-deposited Internal construction: Mounting Recommendation Packing To minimize or avoid shock and/or Available taped and reeled. Capacitor paper vibration stresses to terminating wires Vacuum-deposited and solder connections we recommend to Detailed taping information and graphs electrode Metal contact layer fix voluminous resin-potted MP capacitors at the end of the catalogue. (schoopage) as from e.g. PCM 22.5 mm in an Terminating wire appropriate way since for constructional For further details and graphs please reasons they do not sit tight on the refer to Technical Information. board. Encapsulation: * If safety-approved EMI suppression Self-extinguishing epoxy resin, UL 94 V-0, capacitors are operated with a DC vol- metal foil tage being above the specified AC voltage Terminations: rating the given approvals are no longer Tinned wire. valid (IEC 60384-14). Marking: Furthermore the permissible pulse rise time Marking: Black on Silver. du/dt (F ) will be subject to a reduction max. according to F = F x 2 x UAC / UDC max. r if the DC operating voltage UDC is higher than 2 x UAC 100 06.210.15 -- 0.22 -- --0.33F PCM22.5 -- 1000 pF -- 2200 pF CM 10 P -- 4700 pF -- 6800 pF -- 0.01 F -- 0.022 F PCM 15 -- 0.047 F -- 0.1 F D WIMA MP 3-X2 Continuation General Data 250 VAC* 275 VAC* Capacitance W H L PCM** Part number W H L PCM** Part number 1000 pF 4 8.5 13.5 10 MPX20W1100FA00 4 8.5 13.5 10 MPX21W1100FA00 1500 4 8.5 13.5 10 MPX20W1150FA00 4 8.5 13.5 10 MPX21W1150FA00 2200 4 8.5 13.5 10 MPX20W1220FA00 4 8.5 13.5 10 MPX21W1220FA00 3300 4 8.5 13.5 10 MPX20W1330FA00 4 8.5 13.5 10 MPX21W1330FA00 4700 5 10 13.5 10 MPX20W1470FB00 5 10 13.5 10 MPX21W1470FB00 6800 5 13 19 15 MPX20W1680FC00 5 13 19 15 MPX21W1680FC00 0.01 mF 5 13 19 15 MPX20W2100FC00 5 13 19 15 MPX21W2100FC00 0.015 5 13 19 15 MPX20W2150FC00 5 13 19 15 MPX21W2150FC00 0.022 5 13 19 15 MPX20W2220FC00 5 13 19 15 MPX21W2220FC00 0.033 6 14 19 15 MPX20W2330FD00 6 14 19 15 MPX21W2330FD00 0.047 7 15 19 15 MPX20W2470FE00 7 15 19 15 MPX21W2470FE00 0.068 8 17 19 15 MPX20W2680FF00 8 17 19 15 MPX21W2680FF00 0.1 mF 10 18 19 15 MPX20W3100FG00 10 18 19 15 MPX21W3100FG00 8 20 28 22.5 MPX20W3100FH00 8 20 28 22.5 MPX21W3100FH00 0.15 8 20 28 22.5 MPX20W3150FH00 8 20 28 22.5 MPX21W3150FH00 0.22 10 22 28 22.5 MPX20W3220FI00 10 22 28 22.5 MPX21W3220FI00 0.33 12 24 28 22.5 MPX20W3330FJ00 12 24 28 22.5 MPX21W3330FJ00 * f = 50/60 Hz Part number completion: ** PCM = Printed circuit module = pin spacing Tolerance: 20 % = M Upon request with long pins 35-2 mm max. Packing: bulk = S Pin length: 6-2 = SD Dims. in mm. Taped version see page 161. 10 W L Z H 1 7 5 3 6-2 0.1 d PCM 7 at the pin exit 5 points 3 (0.5) d = 0.6 P if PCM 10 0.01 0.1135 73 5710 35 7100 1000 d = 0.8 P if PCM 15 f/MHz Impedance change with frequency (general guide) Rights reserved to amend design data without prior notification. 101 06.21