WPMDH1200601 / 171020601 3 MagI C Power Module VDRM Variable Step Down Regulator Module 6V 42V / 2A / 0.8V 6V Output DESCRIPTION FEATURES The VDRM series of the MagIC Power Module family Peak efficiency above 90% provides a fully integrated DC-DC power supply including Current capability up to 2A the buck switching regulator and inductor in a package. Input voltage range: 6V to 42V Output voltage range: 0.8V to 6V The 171020601 offers high efficiency and delivers up to Reference accuracy: 2% 2A of output current. It operates from 6V input voltage up No minimum load required to 42V. It is designed for fast transient response. Integrated shielded inductor solution for quick time to market and ease of use It is available in an innovative industrial high power Single exposed pad for best-in-class thermal density TO263-7EP (10.16 x 13.77 x 4.57mm) package performance that enhances thermal performance and allows for hand Low output voltage ripple (< 10mV ) pp or machine soldering. Adjustable switching frequency: 0.2 to 0.8 MHz The VDRM regulators have an integrated protection Low ripple Constant On-Time control circuit that guards against thermal overstress and Synchronous operation electrical damage by using thermal shut-down, Automatic power saving operation at light load overcurrent, short-circuit, overvoltage and undervoltage Undervoltage lockout protection (UVLO) protection. Adjustable soft-start Thermal shutdown Short circuit protection Cycle-by-cycle current limit TYPICAL APPLICATIONS Output overvoltage protection Pin compatible with 171012401, 171012402, Point-of-Load DC-DC applications from 9V, 12V, 18V 171032401, 171010601 and 171030601 and 24V industrial rails Operating ambient temperature up to 105C Industrial, test & measurement, medical applications RoHS and REACh compliant System power supplies Operating junction temp. range: -40 to 125C DSPs, FPGAs, MCUs and MPUs supply Mold compound UL 94 Class V0 (flammability I/O interface power supply testing) certified Complies with EN55022 class B radiated emissions standard TYPICAL CIRCUIT DIAGRAM 1 7 V VIN VOUT V IN OUT R R FBT CFF ON Module 2 6 RON FB C C IN OUT 4 AGND 3 EN PGND SS EP 5 C R SS FBB GND GND we-online.com Wrth Elektronik eiSos GmbH & Co. KG Data Sheet Rev. 2.0 September 2017 1/54 TO263-7EPWPMDH1200601 / 171020601 3 MagI C Power Module VDRM Variable Step Down Regulator Module PACKAGE EP Exposed Pad = PGND YMLLLLG3 WPMDH 1200601JT 1 2 3 4 5 6 7 7 6 5 4 3 2 1 6 6 7 7 Top View Bottom View MARKING DESCRIPTION Marking Description WE Wrth Elektronik tradename Y Year M Month LLLL Assembly lot code G3 Lead finish code per Jedec Norm (green 3 mat sin) WPMDH Wrth Part Description (part 1) 1200601JT Wrth Part Description (part 2) PIN DESCRIPTION SYMBOL NUMBER TYPE DESCRIPTION The supply input pin is a terminal for an unregulated input voltage source. It is required VIN 1 Power to place the input capacitor nearby the VIN pin and PGND. An external resistor from R to VIN pin sets the on-time and frequency of the ON RON 2 Input application. Connecting this pin to GND disables the device. Connecting this pin to a voltage higher than 1.18V typ. (but <6.5V) or leaving it floating enables the device. This pin EN 3 Input can be used in order to set an external UVLO through a resistor divider. If this pin is left floating the device is always on. The analog ground pin is the reference point for all stated voltages. It is internally AGND 4 Supply connected to PGND. For the soft-start function there is an internal 8A current source which charges an SS 5 Input external capacitor (CSS) to generate the soft-start. A minimum capacitance is required The feedback pin is internally connected to the regulation circuitry, the overvoltage and short-circuit comparators. The regulation reference point is 0.8V at this input pin. FB 6 Input Connect the feedback resistor divider between the output and AGND to set the output voltage. The output voltage pin is connected to the internal inductor. For the best stability and VOUT 7 Power operation connect the output capacitor between this pin and PGND. Exposed Pad Main node for switch current of the internal low-side MOSFET. Used PGND EP Power as heat sink for power dissipation during operation. we-online.com Wrth Elektronik eiSos GmbH & Co. KG Data Sheet Rev. 2.0 September 2017 2/54 VIN RON EN AGND SS FB VOUT VOUT FB SS AGND EN RON VIN