Dimensions: mm Recommended Land Pattern: mm Electrical Properties: Properties Test conditions Value Unit Tol. Resistance R 2 m 5% Rated Power P 70 C 2 W Rated Temperature Coefficient of TCR 100 ppm/ C max. Resistance (min.) Temperature Coefficient of TCR 100 ppm/ C max. Resistance (max.) 2,2 0,25 Rated Current I 31.62 A max. 2,2 0,25 R 2,9 1,8 Rated Voltage U 31.6228 mV max. R 7,6 6,3 0,25 Scale - 5:1 2,2 0,25 2,2 0,25 Schematic: General Information: Resistance Element Type Fe - Cr Resistor Technology Metal Plate Resistors Operating Temperature -55 up to +155 C Storage Conditions 5 C - 35 C 25 % up to 75 % RH (in original packaging) Moisture Sensitivity Level (MSL) 1 Test conditions of Electrical Properties: +20 C, 35 % RH if not specified differently FIT according to separate documentation Component conform to REACh and RoHS requirements and standards Scale - 5:1 CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions KaS PSL DIN ISO 2768-1m Max-Eyth-Str. 1 74638 Waldenburg DESCRIPTION TECHNICAL REFERENCE Germany MC2512R002J201KAATE0000 Tel. +49 (0) 79 42 945 - 0 WRIS-PSMC Metal Plate Resistors www.we-online.com ORDER CODE eiSos we-online.com 580070763021 SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.000 Valid 2018-10-30 eiSos 1/6 2512 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 3,1 0,25 0,58 0,15 3,5Mechanical Properties: Derating Curve: Properties Definition Termination plating Ni/Cu/Ni/Sn Adhesive Strenght of 60 1 sec 17.7N Termination Vibration 5 g for 20 minutes, 12cycles each of 3 orientations 10 - 2000 - 10 Resistance Hz Resistance to Solder Temperature 260C 5C Solder Heat Dipping Time No dipping Specific Refer to Soldering Profile CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions KaS PSL DIN ISO 2768-1m Max-Eyth-Str. 1 74638 Waldenburg DESCRIPTION TECHNICAL REFERENCE Germany MC2512R002J201KAATE0000 Tel. +49 (0) 79 42 945 - 0 WRIS-PSMC Metal Plate Resistors www.we-online.com ORDER CODE eiSos we-online.com 580070763021 SIZE REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.000 Valid 2018-10-30 eiSos 2/6 2512 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.