60311042114502 Wurth

O 6,5 0,05 O 10,2 O 1,5 0,05 Dimensions: mm Recommended Hole Pattern: mm 5,08 0,05 2,54 0,05 2 8 Hex 19,69 16,5 11,27 5,08 Scale - 7:1 Recommended Panel Cutout: mm 1,27 6 0,05 Panel Thickness: 2,7 mm Max 5.8 A/F 1/4-36UNS-2A Scale - 2:1 CREATED CHECKED GENERAL TOLERANCE PROJECTION Article Properties: Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions DaSc JTs DIN ISO 2768-1m Properties Value Unit Tol. Max-Eyth-Str. 1 DESCRIPTION Panel Thickness 2.7 mm max. 74638 Waldenburg Germany SMA PCB THT Jack Right Angle Tel. +49 (0) 79 42 945 - 0 ORDER CODE Rear Mount Bulkhead WR-SMA www.we-online.com 60311042114502 eiSos we-online.com REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.000 Valid 2018-03-19 eiCan 1/5 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. O 1,7 0,05 O , 6 5 5,08 q 1,02 q 7,92 10,46 7,06 3,94 2,54 0,05 5,08 0,05Material Properties: Contact Resistance After Test 2) R 4 m max. Contact Resistance Initial 3) R 2 m max. Insulator Material PTFE Insulator Color White Contact Resistance After Test 4) R 2 m max. Withstanding Voltage 500 V (AC) in 60 sec. 1000 V (RMS) min. Center Contact Material Beryllium Copper Working Voltage 5) 335 V (RMS) min. Center Contact Plating Gold, min. 0.76m over Nickel Body Material Brass 1) Center Contact 2) Center Contact Body Plating Gold, min. 0.076m over Nickel 3) Outer Contact 4) Outer Contact Nut Material Brass 5) At sea level Nut Plating Gold, min. 0.076m over Nickel VSWR: The VSWR in application varies decisively according to PCB layout Lock Washer Material Brass Mechanical Properties: Lock Washer Plating Gold, min. 0.076m over Nickel Properties Value Unit Tol. Center Contact Retention (Axial) 26.7 N min. Kind Properties: Mating Cycle 500 Cycles Interface MIL-STD-348 Recommended Mating Torque 57 Ncm Connector Type SMA Gender Jack Packaging Properties: Orientation Type Right Angle Properties Value Packaging Tray General Information: Packaging Unit Qty. 70 Operating Temperature -65 C up to +165 C Compliance RoHS Electrical Properties: Properties Test conditions Value Unit Tol. Impedance DC~12.4 GHz Z 50 Frequency Range f DC~12.4 GHz VSWR DC~12.4 GHz 1.3 max. Insertion Loss DC~12.4 GHz IL 0.16 dB max. Insulation Resistance 500 V (DC) in 120 sec. R 5000 M min. ISO Contact Resistance Initial 1) R 3 m max. CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions DaSc JTs DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg Germany SMA PCB THT Jack Right Angle Tel. +49 (0) 79 42 945 - 0 ORDER CODE Rear Mount Bulkhead WR-SMA www.we-online.com 60311042114502 eiSos we-online.com REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.000 Valid 2018-03-19 eiCan 2/5 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.