Dimensions: mm Recommended Land Pattern: mm 9,9 0,05 9,9 0,05 7,1 0,05 7,1 0,05 0,9 0,05 1,02 1,02 P.C.B End A-A 0,76 9,52 A Bottom View Top View 1/4-36UNS-2B A P.C.B Thickness: 1,6 mm Scale - 5:1 8 HEX Scale - 2,5:1 CREATED CHECKED GENERAL TOLERANCE PROJECTION Article Properties: Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions DaSc JTs DIN ISO 2768-1m Properties Value Unit Max-Eyth-Str. 1 DESCRIPTION PCB Thickness 1.6 mm 74638 Waldenburg Germany SMA PCB End Launch Plug Round Tel. +49 (0) 79 42 945 - 0 ORDER CODE Post for 1.6mm PCB WR-SMA www.we-online.com 60314202124525 eiSos we-online.com REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.000 Valid 2018-03-19 eiCan 1/5 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. 7,92 1,64 4,76 12,67 1,85 1,73 1,02 0,38 5,0 0,05 5,0 0,05Material Properties: VSWR 12.4 GHz~18 GHz 1.4 max. Insertion Loss 12.4 GHz~18 GHz IL 0.2 dB max. Insulator Material PTFE Insulator Color White Insulation Resistance 500 V (DC) in 120 sec. R 5000 M min. ISO Contact Resistance Initial 1) R 3 m max. Center Contact Material Brass Contact Resistance After Test 2) R 4 m max. Center Contact Plating Gold, min. 0.76m over Nickel Body Material Brass Contact Resistance Initial 3) R 2 m max. Contact Resistance After Test 4) R 2 m max. Body Plating Gold, min. 0.076m over Nickel Withstanding Voltage 500 V (AC) in 60 sec. 1000 V (RMS) min. Coupling Nut Material Brass Working Voltage 5) 335 V (RMS) min. Coupling Nut Plating Gold, min. 0.076m over Nickel Retention Ring (C Ring) Material Stainless Steel 1) Center Contact 2) Center Contact Retention Ring (C Ring) Plating Passivated 3) Outer Contact 4) Outer Contact Gasket Material Silicone 5) At sea level Gasket Color Red VSWR: The VSWR in application varies decisively according to PCB layout Mechanical Properties: Kind Properties: Properties Value Unit Tol. Interface MIL-STD-348 Center Contact Retention (Axial) 26.7 N min. Connector Type SMA Mating Cycle 500 Cycles Gender Plug Coupling Nut Retention 267 N min. Orientation Type Straight Recommended Mating Torque 57 Ncm General Information: Packaging Properties: Operating Temperature -65 C up to +165 C Properties Value Compliance RoHS Packaging Tray Electrical Properties: Packaging Unit Qty. 60 Properties Test conditions Value Unit Tol. Impedance DC~18 GHz Z 50 Frequency Range f DC~18 GHz VSWR DC~12.4 GHz 1.2 max. Insertion Loss DC~12.4 GHz IL 0.14 dB max. CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions DaSc JTs DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg Germany SMA PCB End Launch Plug Round Tel. +49 (0) 79 42 945 - 0 ORDER CODE Post for 1.6mm PCB WR-SMA www.we-online.com 60314202124525 eiSos we-online.com REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.000 Valid 2018-03-19 eiCan 2/5 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.