64403103111000 Wurth

Dimensions: mm 15,2 5.5 A/F 1/4-36UNS-2A 1/4-36UNS-2A Connector 1 Connector 2 Scale - 8:1 CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions DaSc JTs DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg Germany Coax Adaptor SMA Jack to SMA Tel. +49 (0) 79 42 945 - 0 ORDER CODE Jack WR-ADPT www.we-online.com 64403103111000 eiSos we-online.com REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.000 Valid 2018-03-19 eiCan 1/4 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.Material Properties: Withstanding Voltage 500 V (AC) in 60 sec. 1000 V (RMS) min. Working Voltage 5) 335 V (RMS) min. Insulator Material PTFE Insulator Color White 1) Center Contact 2) Center Contact Center Contact Material Beryllium Copper 3) Outer Contact 4) Outer Contact Center Contact Plating Gold, min. 0.76m over Nickel 5) At sea level Body Material Brass Mechanical Properties: Body Plating Gold, min. 0.076m over Nickel Properties Value Unit Tol. Kind Properties: Center Contact Retention (Axial) 26.7 N min. Interface MIL-STD-348 Mating Cycle 500 Cycles Connector Type 1 SMA Recommended Mating Torque 57 Ncm Gender 1 Jack Packaging Properties: Connector Type 2 SMA Gender 2 Jack Properties Value Packaging Bag General Information: Packaging Unit Qty. 50 Operating Temperature -65 C up to +165 C Compliance RoHS Electrical Properties: Properties Test conditions Value Unit Tol. Impedance DC~18 GHz Z 50 Frequency Range f DC~18 GHz VSWR DC~18 GHz 1.3 max. Insertion Loss DC~18 GHz IL 0.16 dB max. Insulation Resistance 500 V (DC) in 120 sec. R 5000 M min. ISO Contact Resistance Initial 1) R 3 m max. Contact Resistance After Test 2) R 4 m max. Contact Resistance Initial 3) R 2 m max. Contact Resistance After Test 4) R 2 m max. CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions DaSc JTs DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg Germany Coax Adaptor SMA Jack to SMA Tel. +49 (0) 79 42 945 - 0 ORDER CODE Jack WR-ADPT www.we-online.com 64403103111000 eiSos we-online.com REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.000 Valid 2018-03-19 eiCan 2/4 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.