64403236111000 Wurth

Dimensions: mm 1/4-36UNS-2B 8 HEX 14,55 Connector 1 Connector 2 Scale - 8:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD JTs 001.000 2020-11-10 DIN ISO 2768-1m DESCRIPTION WR-ADPT Coax Adaptor Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 64403236111000 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com SMA Plug to UMRF Jack eiCan Valid 1/5 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.Material Properties: Electrical Properties: Insulator Material PTFE Properties Test conditions Value Unit Tol. Insulator Color White Insertion Loss IL DC~6 GHz 0.25 dB max. Center Contact Material Beryllium Copper Insulation Resistance R 500 V (DC) in 120 sec. 500 M min. ISO Center Contact Plating Gold, min. 0.076m over Nickel Withstanding Voltage 200 V (AC) in 60 sec. 200 V (RMS) min. Body Material Brass Mechanical Properties: Body Plating Gold, min. 0.076m over Nickel Properties Value Unit Tol. Coupling Nut Material Brass Center Contact Retention (Axial) 26.7 N min. Coupling Nut Plating Gold, min. 0.076m over Nickel Mating Cycle 500 Cycles Retention Ring (C Ring) Material Stainless Steel Coupling Nut Retention 267 N min. Retention Ring (C Ring) Plating Passivated Recommended Mating Torque 57 N*cm Gasket Material Silicone Gasket Color Red Certification: Kind Properties: RoHS Approval Compliant 2011/65/EU&2015/863 REACh Approval Conform or declared Properties Value Halogen Free Conform JEDEC JS709B Interface MIL-STD-348 Halogen Free Conform IEC 61249-2-21 Interface 1 IO SMA 1 Gender 1 Plug Interface 2 IO UMRF 2 Gender 2 Jack General Properties: Operating Temperature -65 up to +165 C Electrical Properties: Properties Test conditions Value Unit Tol. Impedance Z DC~6 GHz 50 Frequency Range f DC~6 GHz VSWR DC~6 GHz 1.2 max. CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD JTs 001.000 2020-11-10 DIN ISO 2768-1m DESCRIPTION WR-ADPT Coax Adaptor Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 64403236111000 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com SMA Plug to UMRF Jack eiCan Valid 2/5 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.