O 10,2 O 6,5 0,05 Dimensions: mm Recommended Panel Cutout: mm 11,4 5.8 A/F L Connector 1 Connector 2 2 CREATED CHECKED GENERAL TOLERANCE PROJECTION Article Properties: Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions DaSc JaC DIN ISO 2768-1m Properties Value Unit Tol. Max-Eyth-Str. 1 DESCRIPTION Nominal Cable Length L 152.4 mm 74638 Waldenburg Germany SMA Right Angle Plug to SMA Panel Thickness 2.8 mm max. Tel. +49 (0) 79 42 945 - 0 ORDER CODE Straight Bulkhead Jack on Flexible www.we-online.com 65503603215303 Cable RG174 WR-CXASY eiSos we-online.com REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.001 Valid 2018-05-24 eiCan 1/5 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. O 6,5 6 0,05Material Properties Cable: Body Material Brass Body Plating Gold, min. 0.076m over Nickel Properties Value Unit Cable RG-174/U Ferrule Material Brass Ferrule Plating Gold, min. 0.076m over Nickel Nominal Outer Cable Diameter 2.7 mm Heat Shrink Tube Material PE Material Properties Connector 1: Heat Shrink Tube Color Black Insulator Material PTFE Nut Material Brass Insulator Color White Nut Plating Gold, min. 0.076m over Nickel Center Contact Material Brass Lock Washer Material Brass Center Contact Plating Gold, min. 0.76m over Nickel Lock Washer Plating Gold, min. 0.076m over Nickel Body Material Brass Kind Properties: Body Plating Gold, min. 0.076m over Nickel Interface MIL-STD-348 Coupling Nut Material Brass Cable Type Flexible Coupling Nut Plating Gold, min. 0.076m over Nickel Cable Shielding Braid Retention Ring (C Ring) Material Stainless Steel Connector Type 1 SMA Retention Ring (C Ring) Plating Passivated Gender 1 Plug Gasket Material Silicone Orientation Type 1 Right Angle Gasket Color Red Connector Type 2 SMA Ferrule Material Brass Gender 2 Jack Ferrule Plating Gold, min. 0.076m over Nickel Orientation Type 2 Straight Cover Material Brass Cover Plating Gold, min. 0.076m over Nickel General Information: Heat Shrink Tube Material PE Operating Temperature -20 C up to +80 C Heat Shrink Tube Color Black Compliance RoHS Material Properties Connector 2: Electrical Properties: Insulator Material PTFE Properties Test conditions Value Unit Tol. Insulator Color White Impedance DC~1 GHz Z 50 Center Contact Material Beryllium Copper Frequency Range f DC~1 GHz Center Contact Plating Gold, min. 0.76m over Nickel CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions DaSc JaC DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg Germany SMA Right Angle Plug to SMA Tel. +49 (0) 79 42 945 - 0 ORDER CODE Straight Bulkhead Jack on Flexible www.we-online.com 65503603215303 Cable RG174 WR-CXASY eiSos we-online.com REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.001 Valid 2018-05-24 eiCan 2/5 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.