O 10,2 O 6,5 0,05 Dimensions: mm Recommended Panel Cutout: mm 11,4 5.8 A/F L Connector 2 Connector 1 2 CREATED CHECKED GENERAL TOLERANCE PROJECTION Article Properties: Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions DaSc JaC DIN ISO 2768-1m Properties Value Unit Tol. Max-Eyth-Str. 1 DESCRIPTION Nominal Cable Length L 152.4 mm 74638 Waldenburg Germany SMA Right Angle Plug to SMA Panel Thickness 2.8 mm max. Tel. +49 (0) 79 42 945 - 0 ORDER CODE Straight Bulkhead Jack on Hand- www.we-online.com 65503603215307 Formable Cable .141 WR-CXASY eiSos we-online.com REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.001 Valid 2018-05-24 eiCan 1/5 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. O 6,5 6 0,05Material Properties Cable: Heat Shrink Tube Material PE Heat Shrink Tube Color Black Properties Value Unit Cable .141 Nut Material Brass Nut Plating Gold, min. 0.076m over Nickel Nominal Outer Cable Diameter 3.58 mm Lock Washer Material Brass Material Properties Connector 1: Lock Washer Plating Gold, min. 0.076m over Nickel Insulator Material PTFE Kind Properties: Insulator Color White Interface MIL-STD-348 Center Contact Material Brass Cable Type Hand-Formable Center Contact Plating Gold, min. 0.76m over Nickel Cable Shielding Tin-soaked Body Material Brass Connector Type 1 SMA Body Plating Gold, min. 0.076m over Nickel Gender 1 Plug Coupling Nut Material Brass Orientation Type 1 Right Angle Coupling Nut Plating Gold, min. 0.076m over Nickel Connector Type 2 SMA Retention Ring (C Ring) Material Stainless Steel Gender 2 Jack Retention Ring (C Ring) Plating Passivated Orientation Type 2 Straight Gasket Material Silicone Gasket Color Red General Information: Cover Material Brass Operating Temperature -65 C up to +165 C Cover Plating Gold, min. 0.076m over Nickel Compliance RoHS Heat Shrink Tube Material PE Heat Shrink Tube Color Black Electrical Properties: Material Properties Connector 2: Properties Test conditions Value Unit Tol. Impedance DC~12.4 GHz Z 50 Insulator Material PTFE Frequency Range f DC~12.4 GHz Insulator Color White VSWR DC~12.4 GHz 1.3 max. Center Contact Material Beryllium Copper Insertion Loss DC~12.4 GHz IL 0.55 dB max. Center Contact Plating Gold, min. 0.76m over Nickel Insulation Resistance 500 V (DC) in 120 sec. R 5000 M min. Body Material Brass ISO Withstanding Voltage 500 V (AC) in 60 sec. 1000 V (RMS) min. Body Plating Gold, min. 0.076m over Nickel CREATED CHECKED GENERAL TOLERANCE PROJECTION Wrth Elektronik eiSos GmbH & Co. KG METHOD EMC & Inductive Solutions DaSc JaC DIN ISO 2768-1m Max-Eyth-Str. 1 DESCRIPTION 74638 Waldenburg Germany SMA Right Angle Plug to SMA Tel. +49 (0) 79 42 945 - 0 ORDER CODE Straight Bulkhead Jack on Hand- www.we-online.com 65503603215307 Formable Cable .141 WR-CXASY eiSos we-online.com REVISION STATUS DATE (YYYY-MM-DD) BUSINESS UNIT PAGE 001.001 Valid 2018-05-24 eiCan 2/5 This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.