Dimensions: mm Recommended Hole Pattern: mm 1 End 1,2 10,16 0,1 pl 0,1 L 0,1 10,16 0,1 End 1 Pl 0,1 6,54 0,1 Pattern Properties: Properties Value Unit Pin to Pin (Middle) p 10.16 mm l CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION Article Properties: METHOD JHe 001.002 2020-04-22 DIN ISO 2768-1m Properties Value Unit DESCRIPTION Pins 2 WR-TBL Series 2566 - 10.16 mm Pin to Pin (Middle) P 10.16 mm Wrth Elektronik eiSos GmbH & Co. KG l ORDER CODE EMC & Inductive Solutions Length L 20.32 mm Max-Eyth-Str. 1 691256610002 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com Horizontal Cable Entry Dual Pin with Rising Cage eiCan Valid 1/5 eiSos we-online.com Clamp This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. O 1,6 9,8 0,1 6 x 5,5 1,2 18,3 0,1 5 29,3 0,1 10,16 0,1Kind Properties: Wire Properties: Properties Value Unit Solid Wire Section (AWG) 6 to 20 (AWG) Pitch P 10.16 mm Solid Wire Section (Metric) 13.30 to 0.52 (mm) Stranded Wire Section (AWG) 6 to 20 (AWG) Material Properties: Stranded Wire Section (Metric) 13.30 to 0.52 (mm) Insulator Material PA66G25 Certification: Insulator Flammability Rating UL94 V-0 Insulator Color Grey VDE Approval 40022112 Type MRT26 Cage Material Steel UL Approval E150931 Cat No. MRT26 (1) Cage Plating Zinc Terminal Screw Material Steel Terminal Screw Plating Zinc Contact Material Copper Alloy Contact Plating Tin over Nickel General Information: Operating Temperature -30 up to +120 C Electrical Properties: Value Properties Test conditions Unit UL VDE Rated Current I 40 57 A R Working Voltage 300 750 V (AC) Withstanding Voltage 1 min 1600 3000 V (AC) Mechanical Properties: Properties Value Unit Tightening Torque 1.8 N*m Wire Strip Length 12 (mm) Screw M4 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD JHe 001.002 2020-04-22 DIN ISO 2768-1m DESCRIPTION WR-TBL Series 2566 - 10.16 mm Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 691256610002 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com Horizontal Cable Entry Dual Pin with Rising Cage eiCan Valid 2/5 eiSos we-online.com Clamp This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.