1 2 3 4 5 TECHNICAL CHARACTERISTICS MATERIAL A INSULATOR: LCP FLAMMABILITY RATING: UL94V0 COLOR: BLACK CONTACT / PLATING: ALLOY Cu + Ni & Si / Ni+Sn ENVIRONMENTAL OPERATING TEMPERATURE: -30C UP TO +120C PCB LAYOUT - COMPONENT VIEW COMPLIANCE: LEAD FREE AND ROHS ELECTRICAL UL VDE CURRENT RATING: 20 A 10 A WORKING VOLTAGE: 250 VAC 250 VAC WITHSTANDING VOLTAGE: 1,5 KV 1,5 KV RATED POWER ACCEPTANCE: --- 4 W PROTECTION CLASS: I o II CONTACT RESISTANCE: 5/10 m MAX B STANDARD c usCERTIFIED: E157417 CAT. N: PTF/18 CERTIFIED: 40038367 TYPE: PTF/18 MECHANICAL FUSE-LINK: 5x20 mm PROTECTION RATE: IP00 SHOCKSAFE CATEGORY: PC1 SOLDERING JEDEC LEAD FREE REFLOW SOLDERING PACKAGING BOX C RoHS Compliant G PROJECTION: GENERAL TOLERANCE F 0,1 BMa E PCN 19-AUG-19 D 14-MAR-17 PCN AK C 30-JUN-15 SHOCKSAFE AK UNIT: MM DESCRIPTION: FUSEHOLDER BLOCKS - PCB - CLIP COVER - SMT - SIZE APPROVAL: FBr D GLOW WIRE PLASTIC - WR-FSH B SCALE: 01-APR-15 PROTECTION RATE QL A 10-SEP-14 PDF AK A4 SHEET: 1/3 WERI PART NO: 696 103 101 002 REV DATE FILE BY DRAW: AK1 2 3 4 5 Cautions and Warnings: Cleaning and Washing: Parts are not constructed for washing, so washing can cause malfunction afterwards. The following conditions apply to all goods within the product services of the Cleaning agent that are used to clean the customer applications might damage or change the characteristics of the component, body, pins and termination. Connectors of Wrth Elektronik eiSos GmbH & Co. KG: A Please do not submerse our washable products into water or cleaning agents or put them in locations exposed to water completely. General: When cleaning by hand (brushing), please do not use excessive force on our connectors to avoid malfunction afterwards, because customer could deform function relevant areas. This electronic component is designed and developed with the intention for use in general electronics equipment. We recommended a solution without organic acid (preserve the plating against corrosion) volatile, without residues Before incorporating the components into any equipment in the eld such as military, aerospace, aviation, nuclear control, and compatible with the plastic. submarine, transportation, (automotive control, train control, ship control), transportation signal, disaster We recommend to perform tests and to let a part in immersion in the solution 8 to 12 hours and see if there is prevention, medical, public information a degradation. network etc. where higher safety and reliability are especially required or if there is possibility of direct damage or injury to human body, Wrth Elektronik must be asked for a written approval. Storage Conditions: In addition, even electronic component in general electronic equipment, when used in electrical circuits that require high safety, reliability functions or performance, the sufcient reliability evaluation-check for the safety must be The Connectors are considered MSL1 into closed original packaging and are not subject to storage time limits performed by the user before usage. regarding the moisture sensivity but all products shall be used before the end of the period of 12 months based The connector is designed and manufactured to be used within the datasheet specied values. on the products date code, if not 100% solderability cant be warranted. Do not use the connector outside the datasheet specications. Prevent any damage or scratches on the connector, especially on the actuator. Handling: Direct mechanical impact to the product shall be prevented (e.g overlapping of the PCBs). B The responsibility for the applicability of the customer specic products and use in a particular customer design is Do not repeatedly operate the connector with excessive force. It may damage or deforms the contact dome which always within the authority of the customer. All technical specication for standard products do also apply to customer results in malfunction. specic products. In the case a product requires particular handling precautions, in addition to the general recommendations Wrth Elektronik products are qualied according to international standards which are listed into each product mentioned here before, these will appear on the product datasheet. reliability report. All products characteristics are therefore given according to results obtained throughout these detailed tests protocols. May any product characteristic be qualied by the customer, out of given Wrth Elektronik specications, Wrth Elektronik cannot insure its validity and sustainability over time. The Connectors are designed to be used along with Wrth Elektronik counterparts and tools. Wrth Elektronik cannot insure the reliability of these components while being used with other products. Product Specic: Soldering: The solder prole must comply with the Wrth Elektronik technical soldering specication, otherwise this will void the warranty. C Other soldering methods are not veried and have to be validated by the customer at his own risk. RoHS Compliant G PROJECTION: GENERAL TOLERANCE F E D C UNIT: MM DESCRIPTION: DISCLAIMER SIZE APPROVAL: JC D B SCALE: A 25/01/2018 A4 UPDATE ESo SHEET: 2/3 WERI PART NO: DISCLAIMER REV DATE FILE BY DRAW: ESo