Dimensions: mm Drillhole specification for PCB: Properties: Properties Test conditions Value Unit Tol. Drill hole specification for chemical surfaces Material Brass detail B Surface Tin (O 1,60 -0,03 ) min. 0,10 Execution Press-Fit O 1,475 0,05 Tightening Torque 17 Nm Insertion Force 40 N per Pin min. 2,54 Extraction Force 1) 30 N per Pin min. 12,7 PCB Thickness min 1.6 mm PCB Thickness max 3.2 mm sectional drawing A-A Rated Current 20 C 320 A max. Operating current depends on PCB, cable lug and cross section of the cable A M 10 min. 25m copper max. 60m 1) min. 24hours after Press-Fit Process Certification: RoHS Approval Compliant 2011/65/EU&2015/863 Drillhole specification for PCB: REACh Approval Conform or declared (EC)1907/2006 Drill hole specification for HAL Halogen Free Conform IEC 61249-2-21 Halogen Free Conform JEDEC JS709B B (O 1,60 -0,03 ) min. 0,10 A O 1,45 0,05 General Information: Operating Temperature -55 up to +150 C Storage Conditions (in original < 40 C < 75 % RH packaging) Storage Conditions (for single 0 C up to +40 C up to 75 % parts) Moisture Sensitivity Level (MSL) 1 max. 15m Sn min. 25m copper max. 60m Scale - 1:1 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD SuPe 001.002 2019-09-23 DIN ISO 2768-1m DESCRIPTION WP-BUTR REDCUBE PRESS-FIT Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 7461058 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com Terminals with internal thread and two rows pin- eiCan Valid 1/3 eiSos we-online.com plate This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. q 16,0 21,0 12,7 Bellved edge 0,3 0,2 around 3,5 0,2 11,0 17,5Cautions and Warnings: The following conditions apply to all goods within the product series of WP-BUTR of Wrth Elektronik eiSos GmbH & Co. KG: General: All recommendations according to the general technical specifications of the data-sheet have to be complied with. The responsibility for the applicability of customer specific products and use in a particular customer design is always within the authority of the customer. Product Specific: Follow all instructions in the datasheet, especially: Drill-hole specifications. Wave and reflow soldering is not applicable. The maximum permissible torques must be complied with to prevent mechanical destruction. While press-fit process PCB should be supported against bending. Chip formation due to material displacement is permitted. CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD SuPe 001.002 2019-09-23 DIN ISO 2768-1m DESCRIPTION WP-BUTR REDCUBE PRESS-FIT Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions Max-Eyth-Str. 1 7461058 74638 Waldenburg Germany SIZE/TYPE BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com Terminals with internal thread and two rows pin- eiCan Valid 2/3 eiSos we-online.com plate This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance.