Dimensions: mm Recommended Land Pattern: mm Electrical Properties: 11,22 Properties Test conditions Value Unit Tol. 0,71 1,02 Inductance L 100 kHz/ 100 mV 8 mA 350 H min. 3,06 Insulation Test Voltage V 1 min. 2250 V (RMS) T Insertion Loss IL 1-100 MHz -1 dB max. 12 1 Return Loss RL 1-30 MHz -18 dB min. 2x O1,4 Return Loss RL 30-60 MHz -14 dB min. Return Loss RL 60-80 MHz -12 dB min. Return Loss RL 80-100 MHz -10 dB min. 1 1,8 12 Crosstalk CT 1-100 MHz -30 dB min. PCB Cutout Area Common Mode 7,0 CMRR 1-100 MHz -35 dB min. 15,65 max. Rejection Ratio 15,62 17,42 Scale - 1,5:1 J1 J8 h 0,1 Schematic: 1:1 TD+ 1 J1 13,21 J4 CTD 2 J5 General Information: TD- 3 J2 1:1 RD+ 4 J3 It is recommended that the temperature of the component does not exceed +85C under worst J7 case conditions CRD 5 J8 Operating Temperature -40 up to +85 C RD- 6 J6 V1+ 9 Storage Conditions (in original < 40 C < 75 % RH V1- 10 packaging) V2+ 11 V2- 12 Moisture Sensitivity Level (MSL) 1 4X75 Test conditions of Electrical Properties: +20 C, 33 % RH if not specified differently 4X10nF/200V 0,001uF/2kV Scale - 1,5:1 Shield Product Marking: Marking 7498210003 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD Marking - Date Code YYWW WE 003.000 2020-03-13 DIN ISO 2768-1m DESCRIPTION WE-RJ45LAN Transformer Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions 10/100Base-T PoE Max-Eyth-Str. 1 7498210003 74638 Waldenburg Germany BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos Valid 1/5 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. DRAFT 21,84 max. 8,89 8,0 18,21 11,3 3,0 3,0 3,0 8,0 10,2 3,5 13,21Certification: RoHS Approval Compliant 2011/65/EU&2015/863 REACh Approval Conform or declared (EC)1907/2006 CHECKED REVISION DATE (YYYY-MM-DD) GENERAL TOLERANCE PROJECTION METHOD WE 003.000 2020-03-13 DIN ISO 2768-1m DESCRIPTION WE-RJ45LAN Transformer Wrth Elektronik eiSos GmbH & Co. KG ORDER CODE EMC & Inductive Solutions 10/100Base-T PoE Max-Eyth-Str. 1 7498210003 74638 Waldenburg Germany BUSINESS UNIT STATUS PAGE Tel. +49 (0) 79 42 945 - 0 www.we-online.com eiSos Valid 2/5 eiSos we-online.com This electronic component has been designed and developed for usage in general electronic equipment only. This product is not authorized for use in equipment where a higher safety standard and reliability standard is especially required or where a failure of the product is reasonably expected to cause severe personal injury or death, unless the parties have executed an agreement specifically governing such use. Moreover Wrth Elektronik eiSos GmbH & Co KG products are neither designed nor intended for use in areas such as military, aerospace, aviation, nuclear control, submarine, transportation (automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network etc.. Wrth Elektronik eiSos GmbH & Co KG must be informed about the intent of such usage before the design-in stage. In addition, sufficient reliability evaluation checks for safety must be performed on every electronic component which is used in electrical circuits that require high safety and reliability functions or performance. DRAFT