AC-DC Power Supplies XPPower ASB110 Series 110 Watts Complete AC/DC Power Supply No Extra Components Required Base Plate Cooled -40 to +85 C Base Plate Temperature Low Profile in Full Brick Package High Efficiency - Up to 91% Universal Input <0.3 W No Load Input Power Optional Heatsink Available Dimensions: Over Current, Over Voltage and Over Temperature Protection ASB110: 4.6 x 2.4 x 0.67 (116.8 x 61 x 17 mm) 3 Year Warranty The ASB110 series is a range of complete low profile, full brick, base-plate cooled AC-DC power supplies which require no external components. The series includes a complete built in EMC filter and AC Fuse as well as bulk storage capacitor providing a complete AC-DC power solution ready for installation into end applications. The ASB110 offers high efficiency to minimise waste heat and heat sinking requirements and operates from -40 C to +85 C on the module base-plate. Models & Ratings (1) (2) Output Power Output Voltage Output Current Noise and Ripple Efficiency Model Number 12.0 V 9.17 A 120 mV 90.0% ASB110PS12 15.0 V 7.33 A 150 mV 90.0% ASB110PS15 24.0 V 4.58 A 240 mV 91.0% ASB110PS24 110 W 28.0 V 3.93 A 280 mV 91.0% ASB110PS28 36.0 V 3.06 A 360 mV 91.0% ASB110PS36 48.0 V 2.29 A 480 mV 90.5% ASB110PS48 Notes 1. Typical efficiency with 230 VAC input and full load. 2. Add suffix -HK- to receive with optional heat-sink fitted. Input Characteristic Minimum Typical Maximum Units Notes & Conditions Derate linearly from 100% load at 90 VAC to 90% load Input Voltage 85 264 VAC at 85 VAC Input Frequency 47 63 Hz Input Current 1.1/0.6 A 115 VAC/Measured at 230 VAC Inrush Current 70 A 230 VAC, cold start at 25 C Power Factor >0.9 Full load Earth Leakage Current 500 A 264 VAC, 60 Hz No Load Input Power 0.3 W Input Protection Internal T3.15A/250 VAC fitted in line General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency 90 % See Models and Ratings table Isolation: Input to Output 3000 VAC Input to Ground 1500 VAC Output to Ground 500 VDC Switching Frequency 70-130 / 50-90 kHz PFC / PWM 3 Power Density 14.8 W/in Mean Time Between Failure 160 kHrs MIL-HDBK-217F at 25 C GB Weight 0.51 (230) lb (g) www.xppower.com 1AC-DC Power Supplies XPPower ASB110 Series Output Characteristic Min. Typ. Max. Units Notes & Conditions Output Voltage 12 48 VDC See Models and Ratings table Initial Set Accuracy 1 % At 60% load Minimum Load No minimum load required Start Up Delay 1.3 s Start Up Rise Time 20 ms Hold Up Time 10 ms Full load and 115 VAC Line Regulation 0.5 % Load Regulation 0.5 % Maximum deviation, recovering to less Transient Response 2 % than 1% within 300 s for 25% step load 20 MHz bandwidth, measured with 20 MHz Bandwidth and Ripple and Noise 1 % pk-pk 10 F electrolytic in parallel with 0.1 F ceramic capacitor. Overload Protection 130 210 % Overvoltage Protection 110 140 % Recycle mains to reset Short Circuit Protection Trip and restart (hiccup), auto resetting Thermal Protection Measured internally, auto resetting Temperature Coefficient 0.02 %/C Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -40 +85 C Baseplate Temperature, see derating curve Cooling Conduction Cooled via Baseplate Operating Humidity 5 90 %RH Non-condensing Storage Temperature -40 +85 C Operating Altitude 5000 m Shock IEC68-2-27, 30 g, 11 ms half sine, 3 times in each of 6 axes Vibration IEC68-2-6, 10-500 Hz, 2 g 10 mins/sweep, 60 mins for each of 3 axes EMC: Emissions Phenomenon Standard Test Level Notes & Conditions Emissions EN55032 Level B Harmonic Current EN61000-3-2 Class A Voltage Flicker EN61000-3-3 EMC: Immunity Phenomenon Standard Test Level Criteria Notes & Conditions ESD EN61000-4-2 3/2 A 8 kV air/4 kV contact Radiated EN61000-4-3 3 V/m A EFT/Burst EN61000-4-4 3 A Surge EN61000-4-5 Installation Class 3 A Conducted EN61000-4-6 3 V A Dip: 100% 10 ms A Dips and Interruptions EN61000-4-11 Dip: 30% 500 ms A/B High Line/Low Line Int:100% 5000 ms B Safety Approvals Safety Agency Safety Standard Notes & Conditions UL UL60950-1, UL62368-1 TUV EN60950-1, EN62368-1 CB IEC60950-1, IEC62368-1 CE Meets all applicable directives UKCA Meets all applicable legislation www.xppower.com 2