FASAS06PFR XP Power

EMI Filter XPPower FASA IEC Inlet with Line Filter IEC320-C14 Filtered Inlet xxx Series Screw Mount & Snap-in Versions Compact Design ITE Applications 1, 3, 6 & 10A Rating 6.3 x 0.8mm Faston Terminals Bleed Resistor Shielded Metal Body Wide Operating Temperature Range 3 Year Warranty The FASA combines an EMI filter with an IEC320-C14 inlet, to provide excellent attenuation in a compact module. They are available as either snap-in (FASASxxPFR) or screw mount (FASASxxSFR) for consumer, commercial, ITE & instrumentation type applications. When fitted to mains powered equipment, they provide excellent attenuation to conducted electro-magnetic interference from the mains supply, whilst reducing any conducted emissions from within the equipment onto the mains supply. Suitable for class I appliances, all models feature a shielded metal body, and are fitted with a bleed resistor to safely discharge the filter capacitors when power is disconnected. Safety approvals are EN60939-2 for passive filters & ANSI/UL1283 for EMI filters. They feature a wide operating temperature range of -40C to +110C with full power operation up to +50C. Specifications Characteristics Minimum Typical Maximum Units Notes and Conditions Rated Voltage 250 VAC Input Frequency DC 400 Hz Rated Current 1 10 A See models and ratings table Earth Leakage Current 0.25 0.48 mA See models and ratings table MTBF 1.75 MHrs MIL-HDBK 217F, 250 VAC 40C Flammability Rating UL94V-2 Temperature Operating -40 110 C See derating curve EN60939-2 Passive filter units for EMI suppression Safety Approvals ANSI/UL1283 Electromagnetic Interference Filters Terminals Faston 6.3 x 0.8mm straight Protection Class Suitable for appliances with protection Class I Dielectric Strength 1500 VAC Electrical Schematic L L Cy Cx R L Cy N N PE PE www.xppower.com 1EMI Filter XPPower FASA Models & Ratings Inductance Leakage Current Capacitance Rated at 10 kHz, Current at Resistance Weight Application Mounting Filter 115 VAC/ 250 VAC/ 0.25 V 50 C Cx Cy 60 Hz 50 Hz L 1 A 0.25 mA 0.45 mA 2 x 6.5 mH 0.1 F 2 x 2.2 nF 1 M 38 g ITE Screw FASAS01SFR 3 A 0.25 mA 0.45 mA 2 x 2.5 mH 0.1 F 2 x 2.2 nF 1 M 37 g ITE Screw FASAS03SFR 6 A 0.25 mA 0.45 mA 2 x 0.8 mH 0.1 F 2 x 2.2 nF 39 g ITE Screw FASAS06SFR 1 M 10 A 0.25 mA 0.45 mA 2 x 0.2 mH 0.1 F 2 x 2.2 nF 1 M 39 g ITE Screw FASAS10SFR 1 A 0.25 mA 0.45 mA 2 x 6.5 mH 0.1 F 2 x 2.2 nF 1 M 39 g ITE Snap-In FASAS01PFR 3 A 0.25 mA 0.45 mA 2 x 2.5 mH 0.1 F 2 x 2.2 nF 1 M 39 g ITE Snap-In FASAS03PFR 6 A 0.25 mA 0.45 mA 2 x 0.8 mH 0.1 F 2 x 2.2 nF 41 g ITE Snap-In FASAS06PFR 1 M 10 A 0.25 mA 0.45 mA 2 x 0.2 mH 0.1 F 2 x 2.2 nF 1 M 41 g ITE Snap-In FASAS10PFR Thermal Derating 100 80 60 40 20 0 -40 -20 0 20 40 60 80 100 120 Mechanical Details Ambient Temperature (C) Screw Mount 0.05 (1.5) 0.19 (5.0) Suggested panel cut-out Suggested panel cut-out (moun ng from rear) (moun ng from front) 2 x 0.13 2 x 0.13 (3.5) (3.5) 1.77 Bo om (45.2) 0.88 L N 0.85 0.85 View (22.5) PE (21.6) (21.6) 2.28 max (58.0 max) 1.13 1.2 4 x 4 x 1.19 (30.3) (28.8) (31.1) R3 max R3 max PE L N 0.81 1.57 (40.0) 1.57 (40.0) 1.57 (40.0) 1.11 (20.6) 1.98 (50.4) (28.3) Snap-In Mount 0.16 (4.1) Suggested panel cut-out (moun ng from front) 1.8 0.94 (45.5) L N Bo om 0.84 PE (24.0) View 2.28 max (21.5) (58.0 max) 1.22 1.12 (28.6) (31.0) 4 x R2 max L PE N 0.81 Panel Thickness 0.8mm-1.6mm 1.11 (20.6) (28.3) All dimensions in inches (mm) www.xppower.com 2 2 x 3.3 Current (%)