FFSAS06BFR XP Power

EMI Filter XPPower FFSA IEC Power Entry Inlet with Line Filter IEC320-C14 Filtered Inlet xxx Series Single Fuse Input Switch Screw Mount Compact Design ITE Applications 1, 2, 4, 6 & 10A Rating 6.3 x 0.8mm Faston Terminals Bleed Resistor Shielded Metal Body Wide Operating Temperature Range 3 Year Warranty Combining a double pole switch, front accessible (when the mains connector is disconnected) single fuse and a filtered IEC320-C14 inlet in a compact single housing, the FFSA is designed for ITE applications. When fitted to mains powered equipment, they provide excellent attenuation to conducted electro-magnetic interference from the mains supply, whilst reducing any conducted emissions from within the equipment onto the mains supply. Suitable for class I appliances, all models feature a shielded metal body, and are fitted with a bleed resistor to safely discharge the filter capacitors when power is disconnected. Safety approvals are EN60939-2 for passive filters & ANSI/UL1283 for EMI filters. They feature a wide operating temperature range of -40C to +110C with full power operation up to +50C. Specifications Characteristics Minimum Typical Maximum Units Notes and Conditions Rated Voltage 250 VAC Input Frequency DC 400 Hz Rated Current 1 10 A See models and ratings table Earth Leakage Current 0.25 0.48 mA See models and ratings table MTBF 1.35 MHrs MIL-HDBK 217F, 250VAC at 40C Flammability Rating UL94V-2 Temperature Operating -40 110 C See derating curve EN60939-2 Passive filter units for EMI suppression Safety Approvals ANSI/UL1283 Electromagnetic Interference Filters Terminals Faston 6.3 x 0.8mm straight Protection Class Suitable for appliances with protection Class I Dielectric Strength 1500 VAC Electrical Schematic SW L L Fuse Cy R Cx1 L Cy N N PE PE Note: Fuse not supplied www.xppower.com 1EMI Filter XPPower FFSA Models & Ratings Leakage current Inductance Capacitance Rated Resistance Weight Application Mounting Filter current 115VAC/60Hz 250VAC/50Hz 10kHz, 0.25V Cx Cy 1A 0.25mA 0.45mA 2 x 6.5mH 0.1 F 2 x 2.2 nF 1M 96g ITE Screw FFSAS01BFR 2A 0.25mA 0.45mA 2 x 3.8mH 0.1 F 2 x 2.2 nF 1M 96g ITE Screw FFSAS02BFR 4A 0.25mA 0.45mA 2 x 1.6mH 0.1 F 2 x 2.2 nF 1M 96g ITE Screw FFSAS04BFR 6A 0.25mA 0.45mA 2 x 0.8mH 0.1 F 2 x 2.2 nF 1M 98g ITE Screw FFSAS06BFR 10A 0.25mA 0.45mA 2 x 0.2mH 0.1 F 2 x 2.2 nF 1M 104g ITE Screw FFSAS10BFR Thermal Derating 100 80 60 40 20 0 -40 -20 0 20 40 60 80 100 120 Ambient Temperature (C) Mechanical Details All dimensions in inches (mm) Suggested Panel Cutout (Mounting from front) 2.48 LN 2.39 (63.0) 2 x 0.13 PE (60.8) (3.5) Min. 2.39 2.56 Use only with a 250V fuse Top View GB20213746.5 CN568462 (60.8) PAT. (65.2) TWM215052US7019612B2 Max. 0.39 (10.0) 2 x 0.12 (3.3) 1.77 1.57 (40.0) 1.16 (45.0) Max. 4xR2.5 Max. (29.5) 0.13 N PE L 1.95 (49.5) 2.51 (64.0) Max. (3.5) 1.57 (40.0) 1.15 Output Terminals: 6.3 mm x 0.8 mm Fast-ons (29.4) Max. Fuse is not supplied. Correct fuse dimensions are 5mm x 20mm www.xppower.com 2 Current (%)