IEQ0548S3V3 XP Power

DC-DC Converter XPPower IEQ05 Series 5 Watt Regulated Single & Dual Output xxx Series Wide 4:1 Input Range Compact SIP8 Package 1500 VDC Isolation Operating Temperature -40 C to +90 C Remote On/Off 3 Year Warranty Dimensions: IEQ05: 0.86 x 0.37 x 0.44 (21.8 x 9.3 x 11.2 mm) Models & Ratings (1,2) Input current Maximum Input voltage Output voltage Output current Efficiency Model number (3) capacitive load No load Full load 3V3 1075 mA 390 mA 1000 F 76% IEQ0512S3V3 5 V 1000 mA 515 mA 1000 F 81% IEQ0512S05 12 V 417 mA 500 mA 220 F 83% IEQ0512S12 4.5-18V 15 V 334 mA 60 mA 505 mA 100 F 83% IEQ0512S15 24 V 209 mA 510 mA 100 F 82% IEQ0512S24 12 V 209 mA 515 mA 100 F 81% IEQ0512D12 15 V 167 mA 510 mA 47 F 82% IEQ0512D15 3V3 1075 mA 195 mA 1000 F 76% IEQ0524S3V3 5 V 1000 mA 255 mA 1000 F 81% IEQ0524S05 12 V 417 mA 250 mA 220 F 83% IEQ0524S12 9-36V 15 V 334 mA 30 mA 250 mA 100 F 84% IEQ0524S15 24 V 209 mA 250 mA 100 F 83% IEQ0524S24 12 V 209 mA 255 mA 100 F 82% IEQ0524D12 15 V 167 mA 255 mA 47 F 82% IEQ0524D15 3V3 1075 mA 95 mA 1000 F 76% IEQ0548S3V3 5 V 1000 mA 130 mA 1000 F 80% IEQ0548S05 12 V 417 mA 125 mA 220 F 83% IEQ0548S12 18-75V 15 V 334 mA 20 mA 125 mA 100 F 84% IEQ0548S15 24 V 209 mA 125 mA 100 F 82% IEQ0548S24 12 V 209 mA 125 mA 100 F 82% IEQ0548D12 15 V 167 mA 125 mA 47 F 83% IEQ0548D15 Notes 1. Input currents measured at nominal input voltage. 3. Maximum capacitive load is per output. 2. Input current is typically 2.5 mA at nominal input voltage when output is remotely turned off. www.xppower.com 1DC-DC Converter XPPower IEQ05 Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions Input Voltage Range 4.5 18 12 V nominal 9.0 36 VDC 24 V nominal 18.0 75 48 V nominal Input Filter Internal Capacitor 36 12 V nominal Input Surge 50 VDC for 1 s 24 V models 100 48 V models ON: open circuit Remote On/Off OFF: 2-4 mA via 1k resistor into pin 3 with respect to pin 1 Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 3.3 30 VDC See Models and Ratings table Initial Set Accuracy 2 % Output Voltage Balance 1 2 % For dual output with balanced laods Minimum Load A No minimum load required Line Regulation 0.3 0.5 % Load Regulation 0.5 1.0 % On dual output models when one load is varied between Cross Regulation 5.0 % 25% and 100% and other is fixed at 100% Recovery within 1% in less than 500 s for a 25% load Transient Response 3 5 % deviation change. 20 MHz bandwidth. Measured using 0.47 F ceramic Ripple & Noise 100 mV pk-pk capacitor. Overload Protection 170 % Short Circuit Protection Continuous, with auto recovery Maximum Capacitive Load See Models and Ratings table Temperature Coefficient 0.02 %/ C General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency 82 % See Models and Ratings table Isolation: Input to Output 1500/1800 VDC 60 s/1 s 9 Isolation Resistance 10 At 500 VDC Isolation Capacitance 250 pF Switching Frequency 100 kHz 3 Power Density 35.7 W/in Mean Time Between Failure 2.4 MHrs MIL-HDBK-217F, +25 C GB Weight 0.01 (4.8) lb (g) Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -40 +90 C See Derating Curve. Storage Temperature -55 +125 C Case Temperature +90 C Humidity 95 %RH Non-condensing Cooling Natural convection Case Flammability UL 94V-0 Rated Non conductive black plastic www.xppower.com 2