DC-DC Converter XPPower ISD01 Series 1 Watt Single & dual output xxx Series 10% input range Ultra compact SMD package 4.2 kVDC isolation 250 VAC/400 VDC working voltage Class B conducted emissions (with minimal additional components) Operating temperature -40 C to +105 C Full Load at +100 C MTBF >7.2 MHrs at 25 C (MIL-HDBK-21F, +25 C GB) Tape & reel package vailable Dimensions: ISD01xxS: 0.5 x 0.44 x 0.27 (12.7 x 11.2 x 6.85 mm) 3 year warranty ISD01xxD: 0.6 x 0.44 x 0.27 (15.24 x 11.2 x 6.85 mm) The ISD01 series is a compact SMD, open frame construction providing a cost effective DC-DC converter with high performance features such as 4.2kV isolation, full load operating temperature to +100 C, high reliabity and short circuit protection. Available in single or dual output variants this product family is ideal for signal conditioning and voltage matching. Models & Ratings (1,2) Input current Maximum (3) Input voltage Output voltage Output current Efficiency Model number (3) capacitive load No load Full load 3.3 V 303 mA 415 mA 220 F 73% ISD0103S3V3 5.0 V 200 mA 405 mA 220 F 75% ISD0103S05 3V3 50 mA (2.97-3.63 V) 3.3 V 151 mA 405 mA 100 F 75% ISD0103D3V3 5.0 V 100 mA 390 mA 100 F 78% ISD0103D05 3.3 V 303 mA 275 mA 220 F 73% ISD0105S3V3 5.0 V 200 mA 265 mA 220 F 76% ISD0105S05 5V 40 mA (4.5-5.5 V) 3.3 V 151 mA 270 mA 100 F 75% ISD0105D3V3 5.0 V 100 mA 260 mA 100 F 78% ISD0105D05 Notes 1. Input currents measured at nominal input voltage. 3. For optional tape & reel package version, add suffix -TR e.g. ISD0105S05-TR. 2. Maximum capacitive load is per output. (reel size 500 pcs) Input Characteristic Minimum Typical Maximum Units Notes & Conditions 2.97 3.63 3V3 nominal Input Voltage Range VDC 4.50 5.50 5 V nominal Input Filter Internal Capacitor 5 3V3 nominal Input Surge VDC for 1 s 9 5 V nominal Input Reflected Ripple Current 20 mA pk-pk www.xppower.com 1DC-DC Converter XPPower ISD01 Series Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 3.3 5 VDC See Models and Ratings table Initial Set Accuracy 3.0 % At 70% load Output Voltage Balance 1.0 % For dual output with balanced laods Minimum Load 10 % Minimum load required Output changes by max of 1.2% for each 1% change in Line Regulation 1.2 %/1% input voltage Load Regulation 10 15/12 % 3.3 V output/5 V output Single/Dual Output. 20 MHz bandwidth. Measured using Ripple & Noise 150/120 mV pk-pk 10 F electrolytic capacitor in parallel with 0.1 F ceramic capacitor Short Circuit Protection 0.5 s max with auto recovery Maximum Capacitive Load See Models and Ratings table Temperature Coefficient 0.03 %/ C General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency 76 % See Models and Ratings table 60s qualification test, 3s production test. Isolation: Input to Output 4200 VDC Working voltage 250 VACrms/400 VDC insulation designation for safety approvals: functional 9 Isolation Resistance 10 At 1000 VDC Isolation Capacitance 25 pF Switching Frequency 50 80 kHz 3 Power Density 16.8 W/in Mean Time Between Failure 7.2 MHrs MIL-HDBK-217F, +25 C GB 0.003 (1.52) For single output Weight lb (g) 0.004 (1.80) For dual output Moisture Sensitivity Level Level 1 IPC/JEDEC J-STD-020D.1 PCB Pad Material Copper PCB Pad Solder Coating Lead free HASL Solder Process IPC/JEDEC J-STD-020D.1 Vibration Tested to MIL-STD 810F Cat 24, 514. 5C-17 random vibration Case Flammability UL 94V-0 Rated Non conductive black plastic Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -40 +105 C See Derating Curve. Storage Temperature -55 +125 C Humidity 95 %RH Non-condensing Cooling Natural convection EMC: Emissions Phenomenon Standard Test Level Notes & Conditions Conducted EN55032 Class B See application notes Radiated EN55032 Class B See application notes EMC: Immunity Phenomenon Standard Test Level Criteria Notes & Conditions ESD Immunity EN61000-4-2 8 kV A Air Discharge Radiated Immunity EN61000-4-3 3 Vrms A External components required, EFT/Burst EN61000-4-4 2 kV A see application notes Surge EN61000-4-5 2 kV A External components required, see application notes Conducted Immunity EN61000-4-6 10 V rms A Magnetic Fields EN61000-4-8 100 A/m A www.xppower.com 2