ITA0512S XP Power

DC-DC Converter ITA Series 1 Watt Dual Output xxx Series SIP Package 40 C to +105 C Operation Full Load to 95 C Ambient 1500 VDC Isolation Class B Conducted & Radiated Emissions MTBF >3.5 MHrs 3 Year Warranty Dimensions: ITA: 0.76 x 0.24 x 0.39 (19.5 x 6.0 x 10.0 mm) Models & Ratings (1) Input Current Maximum (3) Input Voltage Output Voltage Output Current Efficiency Model Number (2) Capacitive Load No Load Full Load 5 V 100 mA 30 mA 253 mA 100 F 80% ITA0505S 5 V 12 V 41.6 mA 30 mA 250 mA 47 F 81% ITA0512S 15 V 33.3 mA 30 mA 250 mA 47 F 81% ITA0515S 5 V 100 mA 15 mA 106 mA 100 F 80% ITA1205S 12 V 12 V 41.6 mA 15 mA 106 mA 47 F 80% ITA1212S 15 V 33.3 mA 15 mA 104 mA 47 F 81% ITA1215S 5 V 100 mA 7 mA 53 mA 100 F 80% ITA2405S 24 V 12 V 41.6 mA 7 mA 53 mA 47 F 80% ITA2412S 15 V 33.3 mA 7 mA 53 mA 47 F 80% ITA2415S Notes 1. Input currents measured at nominal input voltage. 2. Maximum capacitive load is per output. 3. Measured at nominal input voltage and full load. Mechanical Details 0.76 0.24 Pin Connections (19.5) (6.00) Pin Dual Printed Face 1 +Vin 0.37 0.39 2 -Vin (9.50) (10.0) 4 -Vout 0.02 5 Common (0.50) 0.12 6 +Vout (3.05) 7 No Pin 0.10 (2.54) 0.60 (15.24) Notes 1. All dimensions are in inches (mm) 0.02 2. Weight: 0.0053lbs (2.4 g) approx. (0.50) 3. Pin diameter: 0.020.002 (0.50.05) 4. Pin pitch tolerance: 0.014 (0.35) 0.24 0.05 5. Case tolerance: 0.02 (0.5) (6.00) (1.25) 0.01 (0.25) 0.02 (0.50) www.xppower.com 1DC-DC Converter ITA Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions 4.5 5.5 VDC 5 V nominal Input Voltage Range 10.8 13.2 VDC 12 V nominal 21.6 26.4 VDC 24 V nominal Input Filter Capacitor Input Reflected Ripple 15 mA pk-pk Through 12 H inductor and 47 F capacitor 9 VDC for 1000 ms 5 V models Input Surge 18 VDC for 1000 ms 12 V models 30 VDC for 1000 ms 24 V models Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 5 15 VDC See Models and Ratings table Initial Set Accuracy 5 % At 70% load Minimum load required to meet specification. Operation at Minimum Load 10 % no load will not cause damage. Line Regulation 1.2 %/1%Vin Load Regulation +5, -2.5 % From 10% to full load from 70% load point When one load is varied between 25% and 100% and other Cross Regulation 5 % is fixed at 100% Ripple & Noise 60 mV pk-pk 20 MHz bandwidth.Measured using 0.1 F ceramic capacitor Short Circuit Protection Continuous, with auto recovery Maximum Capacitive Load See Models and Ratings table Temperature Coefficient 0.02 %/ C General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency 80 % See Models and Ratings table Isolation: Input to Output 1500 VDC Switching Frequency 40/50 50/70 kHz 5 V/12-24 V input 9 Isolation Resistance 10 Isolation Capacitance 50 pF 3 Power Density 14 Win Mean Time Between Failure 3.6 MHrs MIL-HDBK-217F, +25 C GB Weight 0.0053 (2.4) lb (g) Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -40 +105 C Derate from 100% load at +95 C to 90% at +105 C Storage Temperature -55 +125 C Case Temperature +115 C Humidity 95 %RH Non-condensing Cooling Natural convection www.xppower.com 2