JTE0348D24-H XP Power

DC-DC Converter JTE03 Series 3 Watt 4:1 Input Range xxx Series DIP 24 Plastic Case Operating Temperature 40 C to +100 C Single & Dual Outputs 1500 VDC Isolation, 3000 VDC Option Fully Regulated Output No Minimum Load Required 3 Year Warranty Dimensions: JTE: 1.25 x 0.80 x 0.40 (31.75 x 20.32 x 10.16 mm) Models & Ratings (1) Input Current Maximum (3) Input Voltage Output Voltage Output Current Efficiency Model Number (2) Capacitive Load No Load Full Load 3.3 V 900 mA 10 mA 167 mA 470 F 75% JTE0324S3V3 5.0 V 600 mA 10 mA 160 mA 470 F 79% JTE0324S05 12.0 V 250 mA 10 mA 156 mA 100 F 81% JTE0324S12 15.0 V 200 mA 10 mA 154 mA 100 F 82% JTE0324S15 24.0 V 125 mA 10 mA 154 mA 47 F 82% JTE0324S24 9-36 V 3.3 V 450 mA 10 mA 167 mA 220 F 75% JTE0324D03 5.0 V 300 mA 10 mA 160 mA 220 F 79% JTE0324D05 12.0 V 125 mA 10 mA 156 mA 100 F 81% JTE0324D12 15.0 V 100 mA 15 mA 156 mA 100 F 81% JTE0324D15 24.0 V 63 mA 20 mA 159 mA 47 F 80% JTE0324D24 3.3 V 900 mA 7 mA 84 mA 470 F 75% JTE0348S3V3 5.0 V 600 mA 7 mA 80 mA 470 F 79% JTE0348S05 12.0 V 250 mA 7 mA 78 mA 100 F 81% JTE0348S12 15.0 V 200 mA 7 mA 77 mA 100 F 82% JTE0348S15 24.0 V 125 mA 7 mA 77 mA 47 F 82% JTE0348S24 18-75 V 3.3 V 450 mA 7 mA 84 mA 220 F 75% JTE0348D03 5.0 V 300 mA 7 mA 78 mA 220 F 81% JTE0348D05 12.0 V 125 mA 7 mA 78 mA 100 F 81% JTE0348D12 15.0 V 100 mA 7 mA 78 mA 100 F 81% JTE0348D15 24.0 V 63 mA 10 mA 81 mA 47 F 79% JTE0348D24 Notes 1. Input currents measured at nominal input voltage. 2. Maximum capacitive load is per output. 3. For optional 3000 VDC isolation add suffix -H to model number. www.xppower.com 1DC-DC Converter JTE03 Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions 9 36 VDC 24 V nominal Input Voltage Range 18 75 VDC 48 V nominal Input Filter Pi type Input Reflected Ripple 20 mA pk-pk Through 12 H inductor and 47 F capacitor 50 VDC for 100 ms 24 V models Input Surge 100 VDC for 100 ms 48 V models Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage See Models and Ratings table Initial Set Accuracy 2 % Minimum Load 0A No minimum load required Line Regulation 0.5 % Load Regulation 1.2 % Single output On dual output models when one load is varied between Cross Regulation 5 % 25% and 100% and other is fixed at 100% Recovery within 2% in less than 2 ms for a 25% load Transient Response 3 % deviation change. S3V3 versions: 5% max 20 MHz bandwidth. Measured using 1 F ceramic capacitor Ripple & Noise 80 mV pk-pk D24 versions: 100 mV pk-pk Short Circuit Protection Continuous, with auto recovery Maximum Capacitive Load See Models and Ratings table Temperature Coefficient 0.02 %/ C General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency 81 % See Models and Ratings table Isolation: Input to Output 1500 VDC 3000 VDC option, add -H to model number Switching Frequency 330 kHz 9 Isolation Resistance 10 Isolation Capacitance 1000 pF 3 Power Density 7.5 W/in Mean Time Between Failure 800 kHrs MIL-HDBK-217F, +25 C GB Weight 0.03 (13.0) lb (g) Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -40 +100 C Derate from 100% load at +85 C to no load at +100 C Storage Temperature -55 +125 C Case Temperature +100 C Humidity 95 %RH Non-condensing Cooling Natural convection www.xppower.com 2