JWE0648S15 XP Power

DC-DC Converter XPPower JWE06 Series 6 Watts Regulated Single & Dual Output xxx Series Ultra Wide 4:1 Input Range DIP16 Package 1500 VDC Isolation Operating Temperature -40 C to +105 C Full Power to +75 C ITE Safety Approvals High Power Density Metal Case Dimensions: 3 Year Warranty JWE06: 0.94 x 0.54 x 0.31 (23.8 x 13.7 x 8.0 mm) Models & Ratings (1) Input current (2) Input voltage Output voltage Output current Max. capacitive load Efficiency Model number No load Full load 3.3 V 1500 mA 265 mA 680 F 78% JWE0624S3V3 5.0 V 1200 mA 305 mA 680 F 82% JWE0624S05 12.0 V 500 mA 295 mA 330 F 86% JWE0624S12 9-36V 15.0 V 400 mA 8 mA 295 mA 330 F 86% JWE0624S15 24.0 V 250 mA 290 mA 150 F 87% JWE0624S24 12.0 V 250 mA 295 mA 50 F 86% JWE0624D12 15.0 V 200 mA 290 mA 150 F 87% JWE0624D15 3.3 V 1500 mA 130 mA 680 F 78% JWE0648S3V3 5.0 V 1200 mA 155 mA 680 F 82% JWE0648S05 12.0 V 500 mA 145 mA 330 F 86% JWE0648S12 18-75V 15.0 V 400 mA 6 mA 145 mA 330 F 86% JWE0648S15 24.0 V 250 mA 145 mA 150 F 87% JWE0648S24 12.0 V 250 mA 145 mA 150 F 87% JWE0648D12 15.0 V 200 mA 145 mA 150 F 87% JWE0648D15 Notes 1. Input currents measured at nominal input voltage. 2. Maximum capacitive load is per output. Mechanical Details Pin Connections 178 Pin Single Dual 1 -Vin -Vin Bottom View 0.15 7 No Connection No Connection (3.8) 16 10 9 8 No Connection Common 0.02 (0.5) 9 +Vout +Vout 10 -Vout -Vout 0.60 (15.24) 0.12 (3.0) 0.10 16 +Vin +Vin (2.54) 0.94 (23.8) www.xppower.com 1 1.77 0.07 0.40 (10.16) 0.54 (13.7) 0.31 (8.0)DC-DC Converter XPPower JWE06 Series Input Characteristic Minimum Typical Maximum Units Notes & Conditions 9.0 36 VDC 24 V nominal Input Voltage Range 18.0 75 VDC 48 V nominal Input Filter Internal Pi type ON at 9 V, OFF at <8 V 24 V models Undervoltage Lockout ON at 18 V, OFF at <16 V 48 V models 25 12 V models Input Surge 50 VDC for 1 s 24 V models 100 48 V models Output Characteristic Minimum Typical Maximum Units Notes & Conditions Output Voltage 3.3 30 VDC See Models and Ratings table Initial Set Accuracy 2.0 % At full load Output Voltage Balance 1.0 2.0 % For dual output with balanced laods Minimum Load A No minimum load required Line Regulation 0.2 0.8 % From minimum to maximum input at full load Load Regulation 0.5 1.0 % From 0 to full load On dual output models when one load is varied between Cross Regulation 5.0 % 25% and 100% and other is fixed at 100% Recovery within 1% in less than 250 s for a 25% load Transient Response 3 5 % deviation change. 20 MHz bandwidth. Measured using 0.47 F ceramic Ripple & Noise 55 mV pk-pk capacitor. Overload Protection 150 % Short Circuit Protection Continuous Trip & Restart (Hiccup mode), with auto recovery Maximum Capacitive Load See Models and Ratings table Temperature Coefficient 0.02 %/ C General Characteristic Minimum Typical Maximum Units Notes & Conditions Efficiency 88 % See Models and Ratings table Isolation: Input to Output 1500/1800 VDC 60 s/1 s 9 Isolation Resistance 10 At 500 VDC Isolation Capacitance 500 pF Switching Frequency 370 kHz 3 Power Density 38.0 W/in Mean Time Between Failure MHrs MIL-HDBK-217F, +25 C GB Weight 0.013 (6.1) lb (g) Environmental Characteristic Minimum Typical Maximum Units Notes & Conditions Operating Temperature -40 +105 C See Derating Curve. Storage Temperature -50 +125 C Case Temperature +105 C Humidity 95 %RH Non-condensing Cooling Natural convection Case Flammability UL 94V-0 Rated EMC: Emissions Phenomenon Standard Test Level Notes & Conditions Conducted EN55032 Class A No filter required Radiated EN55032 Class A External Components, see application note. www.xppower.com 2