LCL Series SIngle Output Industrial Supplies High Efficiency Low Cost 150 W Convection Cooled 300 W & 500 W with Internal Fans Outputs form 12 V to 48 V 3 Year Warranty The LCL series is a low cost chassis mount product that is popular in industrial applications. The AC/DC supplies are enclosed in a metal case with terminal block input and output connectors. Three series offer 150, 300 and 500 Watts. Each power range includes six single output models from 12 to 48 VDC. The user adjustable outputs cover all nominal voltage ranges. The LCL150 is convection cooled while the 300 and 500 Watt have internal fans. All LCL models are approved to ITE (60950-1) safety standards and meet EN55022 Level B conducted emissions. Operating temperature range is from -10 C to +70 C with derating above +50 C. Standard features include overvoltage, overload, short circuit, and over temperature protection. Remote sense is included on the LCL500 with Remote On/Off available with the LCL300 and LCL500.xppower.com Models and Ratings (1) Output Power Output Voltage Trim Range Output Current Ripple & Noise Model Number 12.0 V 11.0-13.0 V 12.5 A 100 mV pk-pk LCL150PS12 13.5 V 12.5-14.5 V 11.1 A 100 mV pk-pk LCL150PS13 15.0 V 14.0-16.0 V 10.0 A 100 mV pk-pk LCL150PS15 150 W 24.0 V 23.0-25.0 V 6.3 A 150 mV pk-pk LCL150PS24 27.0 V 26.0-28.0 V 5.6 A 150 mV pk-pk LCL150PS27 48.0 V 47.0-49.0 V 3.1 A 250 mV pk-pk LCL150PS48 12.0 V 11.0-13.0 V 25.0 A 150 mV pk-pk LCL300PS12 300 W 13.5 V 12.5-14.5 V 22.0 A 150 mV pk-pk LCL300PS13 15.0 V 14.0-16.0 V 20.0 A 150 mV pk-pk LCL300PS15 310 W 24.0 V 23.0-25.0 V 13.0 A 150 mV pk-pk LCL300PS24 315 W 27.0 V 26.0-28.0 V 11.7 A 200 mV pk-pk LCL300PS27 320 W 48.0 V 47.0-49.0 V 6.70 A 240 mV pk-pk LCL300PS48 12.0 V 11.0-13.0 V 42.0 A 120 mV pk-pk LCL500PS12 13.5 V 12.5-14.5 V 37.0 A 150 mV pk-pk LCL500PS13 15.0 V 14.0-16.0 V 34.0 A 150 mV pk-pk LCL500PS15 500 W 24.0 V 23.0-25.0 V 21.0 A 150 mV pk-pk LCL500PS24 27.0 V 26.0-28.0 V 18.5 A 150 mV pk-pk LCL500PS27 48.0 V 47.0-49.0 V 10.5 A 240 mV pk-pk LCL500PS48 Notes: 1. Measured with 20 MHz bandwidth. Input Characteristics Characteristic Minimum Typical Maximum Units Notes & Conditions Input Voltage - Operating 85 264 VAC Derate output power < 90 VAC. See fig. 1. Input Frequency 47 63 Hz EN61000-3-2 class A compliant LCL150: EN61000-3-2 class C for loads 40% > Power Factor 0.9 LCL300 & LCL500: EN61000-3-2 class C for loads 40% 2.1 LCL150 at 90 VAC Input Current - Full Load 4.5 A LCL300 at 90 VAC 6.6 LCL500 at 90 VAC 50 LCL150, 230 VAC, cold start 25 C Inrush Current A 60 LCL300 & LCL500, 230 VAC, cold start 25 C Earth Leakage Current <2 mA 264 VAC/60 Hz T3.15 A/250 V internal in-line fuse LCL150 Input Protection T6.3 A/250 V internal in-line fuse LCL300 T10 A/250 V internal in-line fuse LCL500 100 Input Derating Curve Figure 1 90 0 85 90 264 Input Voltage (VAC) 2 Output Power (%)