DATA SHEET
GENERAL PURPOSE CHIP RESISTORS
RC0402 (Pb Free)
5%, 1%
Product specification Sep 03, 2004 V.2 Supersedes Date of Mar. 06, 2003
Product specification 2
10
RC SERIES 0402 (Pb Free)
Chip Resistor Surface Mount
SCOPE
This specification describes RC0402 series chip resistors with lead-free terminations made by thick film process.
ORDERING INFORMATION
Part number is identified by the series, size, tolerance, packing type, temperature coefficient, taping reel and
resistance value.
PHYCOMP ORDERING CODE
PHYCOMP ORDERING CODE
12NC CODE CTC CODE
2322 XXX XXXXX L RC0402 X X X XX XXXX L
(1) (2) (3) (4) (5) (6)
(1) (2) (3) (4)
(2)
( )
1 TOLERANCE
PAPER / PE TAPE ON REEL (units)
TYPE/ START TOL. RESISTANCE
(1)
0402 IN (%) RANGE
10,000 20,000/not preferred 50,000
F = 1%
J = 5%
RC31 2322 5% 1 to 10 M 705 70xxx --- 705 87xxx
( )
RC32 2322 1% 1 to 10 M 706 7xxxx --- 706 8xxxx 2 PACKAGING TYPE
Jumper 2322 - 0 705 91001 --- 705 91007 R = Paper/PE taping reel
( )
3 TEMPERATURE COEFFICIENT
(1) The resistors have a 12-digit Last digit of 12NC
OF RESISTANCE
ordering code starting with (3)
Resistance decade Last digit
= Base on spec
2322.
X
0.01 to 0.0976
0
( )
4 TAPING REEL
(2) The subsequent 4 or 5 digits
X
0.1 to 0.976
7
indicate the resistor
07 = 7 inch dia. Reel
X
1 to 9.76
8
tolerance and packaging.
10 = 10 inch dia. Reel (not preferred)
10 to 97.6 X
9
13 = 13 inch dia. Reel
(3) The remaining 4 or 3 digits
X
100 to 976
1
represent the resistance value
( )
5 RESISTANCE VALUE
with the last digit indicating
1 to 9.76 kX
2
5R6, 56R, 560R, 56K, 1M.
the multiplier as shown in the
X
10 to 97.6 k
3
table of Last digit of 12NC.
X
100 to 976 k
4
(6) RESISTOR TERMINATIONS
(4) L means lead-free
1 to 9.76 MX
5
L = Lead free terminations (pure Tin)
terminations.
X
10 to 97.6 M
6
ORDERING EXAMPLE
X
Example: 0.02
= 0200 or 200
ORDERING EXAMPLE
The ordering code of a RC32
X
0.3
= 3007 or 307
resistor, value 56 X with 1%
The ordering code of a RC0402
X
1
= 1008 or 108
tolerance, supplied in tape of
chip resistor, value 56 X with
X
10,000 units per reel is: 33 k
= 3303 or 333 1% tolerance, supplied in 7-inch
232270675609L.
X
10 M tape reel is: RC0402FR-0756RL.
= 1006 or 106
NOTE
1. The L at the end of the code is only for ordering. On the reel label, the standard CTC or 12NC will be mentioned an additional stamp
LFP= lead free production.
2. Products with lead in terminations fulfil the same requirements as mentioned in this datasheet.
3. Products with lead in terminations will be phased out in the coming months (before July 1st, 2006)
www.yageo.com
Sep 03, 2004 V.2