EDM - 01 SIGNALLING MODULE INSTRUCTION MANUAL Zakad Mechaniki i Elektroniki ZAMEL sp.j. J.W. Dzida, K. odziska ul. Zielona 27, 43-200 Pszczyna, Poland Tel. +48 (32) 210 46 65, Fax +48 (32) 210 80 04 www.zamelcet.com, e-mail: marketing zamel.pl DESCRIPTION TECHNICAL DATA The EDM-01 signalling module may EDM - 01 be used in various systems, where Power terminals: L, N acoustic alarm is needed, e.g. as an Rated voltage: 230 V~ alarm signalling device. The module Rated voltage tolerance: -15 +10 % is very flexible and applicable in Rated frequency: 50 / 60 Hz many circuits owing to the fact that Rated current: 15 mA it is supplied directly from 230 V AC Load supply indicator: piezoelectric loudspeaker network. Connection terminals quantity: 2 2 Connection wire section: 0,2 2,50 mm o Operating temperature: -20 +45 C FEATURES Operating position: optional Casing fastening: TH 35 rail (according to PN-EN 60715) Applicable in signalling systems, Casing IP: IP20 (PN-EN 60529) Continuous duty acoustic module, Protection class: II Supplied directly from 230 V AC Overvoltage category: II network, Pollution level: 2 High sound level, Dimensions: single-module (17,5 mm) 90x17,5x66 mm Weight: Single-module casing, 51 g Standard conformity: PN-EN 60669-1 PN-EN 60669-2-1 Mounted on TH 35 rail. PN-EN 61000-4-2,3,4,5,6,11 APPERANCE The device should be connected to a single- phase system accordin- gly to current standards. The device connections Power terminal (L) Power terminal (N) CAUTION will be described in this manual. Only qualified electricians are allowed to mount, connect and adjust the bell. It is necessary to read this ma- nual before the device mounting. Do not Piezoelectric loudspeaker disassembly the timer casing or you will lose any warranty rights and expose yourself to the electric shock hazard. Before mounting operation make sure of disconnecting the connection wires from the electric network. Use a cross- head screwdriver of 3.5 mm diameter to mount the device. The bell should be carried, stored and used in an ap- propriate way. Do not mount the bell in case of any device parts lack, damage or deformation. In case of malfunction please notify the manufacturer.ASSEMBLY, OPERATION CONNECTIONS TIME DIAGRAMS 1. Disconnect the electric network L by means of an appropriate cut- N off, current-limiting circuit-brea- ker or separator. 2. Check if there is no any vol- tage between power leads by means of an appropriate gau- ge. 3. Mount the EDM-01 module on TH - 35 rail. 4. Connect the system leads accor- UNIT DIAGRAM ding to the electrical diagram. 5. Connect power supply circuit. The device is ready to work just right after its appropriate connecting. PSU An internal piezoelectric loudspea- ker is ON after the module supplying with 230 V~ voltage. The speaker is OFF when power supply is OFF. CASING DIMENSIONS APPLICATION L N The circuit warns against motor switch-OFF. After the motor star by means of MOM-02 module, the PCM-01 counts preset time (e.g. 10 s). During this period the EDM-01 module generates acoustic signal. When the preset time is over, the sound will be OFF and the motor starts. PRODUCT FAMILY The EDM-01 signalling module is a mem- ber of the EDM family. EDM - xx Device version: 01 - continuous op 02 - resettable 03 - bell Device type WARRANTY The product warranty is for a period of 24 months 1. ZMIE ZAMEL SP. J. assures 24 months guarantee for the product. 2. The manufacturers guarantee does not cover any of the following actions: a) mechanical damage during transport, loading / unloading or under other circumstances, b) damage caused by incorrect product mounting or misuse, c) damage caused by unauthorised modifications made by the PURCHASER or any third parties to the product or any other devices needed for the product functioning, d) damage caused by Act of God or any other incidents independent of the manufacturer. 3. The PURCHASER shall lay any claims in writing to the dealer or ZMIE ZAMEL SP. J. 4. ZMIE ZAMEL SP. J. is liable for processing any claim according to current Polish legislation. 5. ZMIE ZAMEL SP. J. shall process the claim at its own discretion: product repair, replacement or money return. 6. The manufacturers guarantee is valid in the Republic of Poland. 7. The PURCHASERs statutory rights in any applicable legislation whether against the retailer arising from the purchase contract or otherwise are not affected by this warranty. Dealer signature & stamp, purchase date