NRD4007TR-5KF

Surface Mount Silicon Rectifi er Diode NRD Series FEATURES VOLTAGE: 50 TO 1000 VOLTS, CURRENT 1.0 AMPERE CORRESPONDS TO 1N4001 THRU 1N4007 IN SURFACE MOUNT PACKAGE FLAT PACK - LOW PROFILE, FOR SURFACE MOUNT APPLICATIONS GLASS PASSIVATED CHIP CONSTRUCTION O HIGH TEMPERATURE SOLDERING (250 C/10 SECONDS) EASY PICK AND PLACE RoHS Compliant includes all homogeneous materials *See Part Number System for Details CATHODE 1.25~1.45 2.54~2.79 MECHANICAL DATA: SIZE: SMA/DO-214AC CASE: Molded epoxy 3.99~4.50 TERMINALS: Solder plated Copper alloy POLARITY: Indicated by cathode band STANDARD PACKAGING: 12mm tape (EIA-RS-481) 4.93~5.28 WEIGHT: 0.064 gram PART NUMBERING SYSTEM 1.98~2.29 NRD 4004 TR -5K F .8~1.3 RoHS Compliant Reel qty: (5K & 7.5K) 0.76~1.27 0.1~0.2 Tape and Reel DIMENSIONS (mm) Voltage designator (See table below) Series 0 MAXIMUM RATINGS (At TA=25 C unless otherwise noted) Ratings Symbol NRD4001 NRD4002 NRD4003 NRD4004 NRD4005 NRD4007 UNITS Maximum Recurrent Peak Reverse voltage VRRM 50 100 200 400 600 1000 Volts Maximum RMS voltage VRMS 35 70 140 280 420 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 1000 Volts Maximum Average Forward Rectifi ed Current TA=75C Io 1.0 Amps Peak Forward Surge Current 8.3ms single half sine- IFSM 30 Amps wave superimposed on rated load (JEDEC method) 0 ELECTRICAL CHARACTERISTICS (At TA=25 C unless otherwise noted) Characteristics Symbol NRD4001 NRD4002 NRD4003 NRD4004 NRD4005 NRD4007 UNITS Maximum Forward Voltage at 1.0A DC VF 1.1 Volts Maximum Full Load Reverse Current 30 Amps Full Cycle Average TA=75C IR Maximum DC Reverse Current at TA=25C 5.0 Amps Rated DC Blocking Voltage TA=125C 50 Amps Maximum Thermal Resistance (Note 1) RqJL 30 C/W Typical Junction Capacitance (Note 2) CJ 15 pF Operating and Storage Temperature Range TJ, TSTG -60 ~ +150C C Maximum Reverse Recovery Time (Note 3) 2.5 S t rr NOTES: 2 1. Thermal resistance junction to terminal, 5mm (0.013 mm Thick) copper land patterns. 2. Measured at 1.0 MHz and applied average voltage of 4.0VDC. 3. Reverse recovery test conditions: If=0.5A, IR=1.0A, t =0.25A rr NIC COMPONENTS www.niccomp.com www.lowESR.com www.RFpassives.com 1Surface Mount Silicon Rectifier Diode NRD Series RATINGS AND CHARACTERISTICS CURVES (NRD4001 THRU 4007 Typical Instanteous Forward Charateristics per Element 100 Derating Curve for Output Tj=25C 40 Pulse Width=300S Rectified Current 2% Duty Cycle 20 3.0 10 Single Phase Half Wave 60Hz 2.5 Resistive or Inductive Load PCB Mounted 4.0 0n 0.315 x0.315 (8.0x8.0mm) 2.0 copper Pad Areas 2.0 1.5 1.0 1.0 0.4 0.5 0.2 0 0.1 75C 0C 150C 50C 100C 0.4 0.6 1.0 1.2 1.4 1.6 1.8 0.8 Temperature (C) Instanteous Forward Voltage (Volts) Typical Peak Reverse Characteristics 100 Maximum Non-repetitive Peak ForwardSurge Current 30 10 25 Tj=100C 20 1.0 15 Tj=75C 0.1 10 Tj=25C 5 0.01 0 1 2 6 10 20 40 60 100 Number of Cycles at 60Hz 0.001 0 20 40 60 80 100 Percentage of Peak Reverse Voltage Typcial Junction Capacitance Transient Thermal Impedance per Element 100 100 50 50 Tj=25C f=1MHz Vsig=50mVp-p 20 20 10 10 3 3 Units Mounted on 20in (5.4mm ) +0.5mil inches (0.013mm) 5 Thick Copper Land Areas 2 2 1 1 1.0 10 100 10 100 1000 0.01 0.1 0.1 1.0 Reverse Voltage (Volts) Heating Time (Seconds) NIC COMPONENTS www.niccomp.com www.lowESR.com www.RFpassives.com 2 Thermal Impedance (C/W) Average Forward Current (Amps) Instanteous Reverse Current (A) Forward Surge Current (Amps pk) Capacitance (pF) (Half Sine-wave) Instanteous Forward Current (Amps)