SBRB2545CTT4G ON Semiconductor

MBRB2545CTG, SBRB2545CTG Schottky Power Rectifier, Switch-Mode, 30 A, 45 V 2 The D PAK Power Rectifier is a stateoftheart device that MBRB2545CTG, SBRB2545CTG MAXIMUM RATINGS (Per Leg) Rating Symbol Value Unit Peak Repetitive Reverse Voltage V 45 V RRM Working Peak Reverse Voltage V RWM DC Blocking Voltage V R Average Rectified Forward Current I 15 A F(AV) (Rated V , T = 164C) Total Device 30 R C Peak Repetitive Forward Current I A FRM (Rated V , Square Wave, 20 kHz, T = 160C) 30 R C NonRepetitive Peak Surge Current I A FSM (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) 150 Peak Repetitive Reverse Surge Current (2.0 s, 1.0 kHz) I 1.0 A RRM Storage Temperature Range T 65 to +175 C stg Operating Junction Temperature (Note 1) T 65 to +175 C J Voltage Rate of Change (Rated V ) dv/dt 10,000 V/ s R Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. The heat generated must be less than the thermal conductivity from JunctiontoAmbient: dP /dT < 1/R . D J JA THERMAL CHARACTERISTICS (Per Leg) Characteristic Symbol Value Unit Thermal Resistance, C/W JunctiontoCase 1.5 R JC JunctiontoAmbient (Note 2) 50 R JA 2. When mounted using minimum recommended pad size on FR4 board. ELECTRICAL CHARACTERISTICS (Per Diode) Symbol Characteristic Condition Min Typ Max Unit V Instantaneous Forward Voltage I = 15 Amp, T = 25C 0.62 V F F J (Note 3) I = 15 Amp, T = 125C 0.50 0.57 F J I = 30 Amp, T = 25C 0.82 F J I = 30 Amp, T = 125C 0.65 0.72 F J I Instantaneous Reverse Current V = 45 Volts, T = 25C 0.2 mA R R J (Note 3) V = 45 Volts, T = 125C 9.0 25 R J 3. Pulse Test: Pulse Width = 300 s, Duty Cycle 2.0%. ORDERING INFORMATION Device Package Shipping 2 MBRB2545CTG D PAK 50 Units / Rail (PbFree) 2 SBRB2545CTG D PAK 50 Units / Rail (PbFree) 2 MBRB2545CTT4G D PAK 800 Units / Tape & Reel (PbFree) 2 SBRB2545CTT4G D PAK 800 Units / Tape & Reel (PbFree) For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D.