IoT Starter Kit IoT Starter Kit Datasheet About This development tool is prepared for quick development of your wireless IoT application. Content DS-IOT-01 IQRF set for wireless connectivity Sensor kit DDC-SE-01 is intended to measure temperature, light intensity and voltage selected by the potentiometer. Relay kit DDC-RE-01 enables to switch connected equipment on/off using two relays inside. These kits are controlled by DPA commands implemented in Custom DPA handlers delivered with the set. The handlers specify HWP identification (HWPID) to individual kits which allows their identification. DS-IOT-01 devices can be connected via the adapter to the UP board and then to any cloud. The gateway as well as the cloud can be adapted for communication with IQRF devices utilizing their HWPIDs. Components 4 x DCTR-72DAT IQRF transceiver CK-USB-04A IQRF programmer and debugger 3 x DK-EVAL-04A Universal portable development kit for TR modules DDC-SE-01 IQRF evaluation and development kit DDC-RE-01 IQRF evaluation and development kit KON-RASP-01 Adapter to connect IQRF transceiver to UP board CAB-USBABMICRO Micro USB cable 18.5 cm USB flash drive Software and documentation (including HWPs and Custom DPA handlers) UP board 2GB + 32 GB eMMC memory The 40 Pin I/O connector, the USB 3.0 OTG, the Gigabit Ethernet, the HDMI and more other features make it a perfect solution for different domains and products like Robotics, Drone, Machine Vision, Smart Home, Education, Digital Signage, Intelligent Cars, Internet Of Things. The compatibility with Linux, Android, and all the Windows 10 distributions give you great flexibility, scalability and quick time to market. Consists of: Intel Atom x5 Z8350 Processor 64 bit - up to 1.92GHz Intel HD 400 Graphics ,12 EU GEN 8, up to 500MHz Support DX*11.1/12, Open GL*4.2, Open CL*1.2 OGL ES3.0, H.264, HEVC(decode), VP8 2GB DDR3L system memory, 32GB eMMC storage capacity 4 x USB2.0 external connector, 2 x USB2.0 port (pin header), USB 3.0 port (OTG) 1 x Gb Ethernet (full speed) RJ-45 2017 MICRORISC s.r.o. www.iqrf.org Page 1 IoT Starter Kit HDMI video output DSI / eDP display interface MIPI-CSI camera interface 5V DC-in 3A 5.5/2.1mm jack power input Power supply Architecture UP board is connected to the IQRF network via SPI interface (adapter) of via CDC interface (GW-USB/CK-USB). You can find installation steps in documentation on