IMU383ZA HIGH PERFORMANCE, FAULT TOLERANT INERTIAL MEASUREMENT SYSTEM The IMU383 ZA is a pin-compatible replacement for the popular IMU380ZA and IMU381ZA Inertial Measurement Units. The IMU383ZA offers improved performance, in addition to a unique fault-tolerant sensor architecture for improved reliability. Other key f eatures include advanced synchronization, and a bootloader for field upgradeability. Features Complete 6DOF Inertial System Fault-tolerant, 3x redundant sensors Bootloader for field upgrades SPI (or UART) Interface Update Rate, 1Hz to 200Hz Precision Farming Platform Stabilization 1KHz Clock Sync Input Miniature Package, 24 x 37 x 9.5 mm The ACEINNA IMU383ZA integrates highly-reliable MEMS Drop-in upgrade for IMU380/381ZA 6 DOF inertial sensors in a miniature factory-calibrated Low Power Consumption < 250 mW module to provide consistent performance through the Wide Temp Range, -40C to +85C e xtreme operating environments in a wide variety of High Reliability, MTBF > 50k hours dynamic control and navigation applications. Applications Unmanned Vehicle Control Precision Agriculture Platform Stabilization Robotics Control IMU383ZA ACEINNA, Inc. www.aceinna.com 6020-1395-01 IMU383ZA HIGH PERFORMANCE, FAULT TOLERANT Performance IMU383ZA-400 INERTIAL MEASUREMENT SYSTEM Angular Rate Range: Roll, Pitch (/sec) 400 1,2 Bias Instability (/hr) 1.3 Bias Stability Over Temp (/sec) < 0.5 Resolution (/sec) < 0.02 Scale Factor Accuracy (%FS) < 0.1 Non-Linearity (%FS) < 0.1 1,2 Angle Random Walk (/h r) 0.08 Bandwidth (Hz) 5-50 (user-configurable) Acceleration Range: X, Y, Z (g) 8 1,2 Bias Instability (mg) 0.015 Bias Stability Over -40C~ 85C (mg) < 5 Resolution (mg) < 0.5 Scale Factor Accuracy (%FS) < 0.1 Non-Linearity (%FS) < 0.1 1,2 Velocity Random Walk ( m /s /h r) 0.02 Bandwidth (Hz) 5-50 (user-configurable) NAV-VIEW provides an easy to use Other Specifications graphical interface to display, record, Environment playback, and analyze all of the Operating Temperature (C) -40 to +85 IMU383ZA system parameters. Non-Operating Temperature (C) -55 to +105 Enclosure Die-Cast Aluminum Electrical NAV-VIEW can also be used to set a Input Voltage (VDC) 3.0 to 5.5 wide range of user-configurable fields Power Consumption (mW) < 250 in the IMU383ZA to optimize the Digital Interface SPI or UART (user-configurable) system performance for highly Output Data Rate 1Hz to 200Hz (user-configurable) dynamic applications. Input Clock Sync 1kHz Sync Pulse Physical NAV-VIEW software is available for Size (mm) 24.15 x 37.7 x 9.5 Weight (gm) < 17 download from ACEINNAs website Interface Connector 20-Pin (10 x 2) 1.0 mm pitch header at: www.aceinna.com/support Ordering Information Model Description EVAL KIT IMU383ZA-400 Inertial Measurement Unit (6 DOF, 400dps Range) The IMU383ZA evaluation kits include IMU383ZA-400 EVK Evaluation Kit for IMU383 an IMU383ZA, evaluation / interface board and USB cable allowing direct connection to a PC for use with NAV- VIEW display and configuration software. This product has been developed exclusively for commercial applications. It has not been tested for, and makes no representation or warranty as to conformance with, any military specifications or its suitability Support for any military application or end-use. Additionally, any use of this product for nuclear, chemical or For more detailed information biological weapons, or weapons research, or for any use in missiles, rockets, and/or UAVs of 300km or greater range, or any other activity prohibited by the Export Administration Regulations, is expressly please refer to the IMU383ZA prohibited without the written consent and without obtaining appropriate US export license(s) when Series Users Manual available required by US law. Diversion contrary to U.S. law is prohibited. Specifications are subject to change without notice. online at: 1 2 Allan Variance Curve, constant temperature. mean + 1-sigma of production population. www.aceinna.com/support ACEINNA, Inc. www.aceinna.com 6020-1395-01