High Accuracy Current Sensor IC with 1.5MHz 3dB Bandwidth and Isolation 5A, 20A, 50A, 5V, Fixed Gain MCA1101-xx-5 FEATURES DESCRIPTION AMR based integrated current sensor The MCA1101 products are 5A, 20A, 50A fully integrated bi-directional analog output current sensors that Superior Range & Accuracy deliver both high accuracy and high bandwidth. ACEINNAs 0.6% typical total error 25C (MCA1101-20-5) state-of-the-art Anisotropic Magneto Resistive (AMR) sensor 2.0% max error over temperature (MCA1101-20-5) technology provides inherently low noise, excellent linearity Superior Frequency Response and repeatability. 1.5 MHz (typical 3dB BW) Fast output response time (300ns typical) A fully isolated current path is provided by a low resistance Low Primary Resistance (0.9 m) copper conductor integrated into the package making it Single 5V Supply Operation suitable for both high-side and low side bi-directional current Low power consumption (6.5mA typical) sensing. The high bandwidth of 1.5MHz (3dB) and low Zero-Current Reference Pin (Vref) phase delay makes it ideal for current sense feedback loops Overcurrent fault detection in motor control, inverters, uninterruptible power supplies, SOIC-16 package (RoHS/REACH compliant) battery management, power factor correction, high voltage distribution bus converters and power supply applications, -40 to +105C Operating Temperature Range including those with fast switching wide-bandgap SiC and UL/IEC/EN60950-1 Certified GaN based power stages. 4.8 kV Dielectric Strength Voltage 1097 VRMS Basic Isolation Voltage These devices are factory-calibrated to achieve low offset 400 VRMS Reinforced Isolation Voltage error and provide a precise analog voltage output that is linearly proportional to the conduction current (AC or DC) APPLICATIONS with sensitivity (mV/A) compatible with A/D converters and Server, Telecom, & Industrial PWR Supplies analog control loops in power systems. The AMR sensor Power Aggregation, Over-Current Protection device structure is designed to eliminate sensitivity to stray Dynamic Current Sensing in Feedback Loops and common mode magnetic fields. PFC and Inverter Control Due to the inherently low output noise of ACEINNAs sensor Motor Control Loops & Protection technology, additional filtering is not required to reduce Automation, Robotics, Servo Systems noise that reduces accuracy at low-level currents in systems Automotive & EV Power Systems with dynamic load profiles. Solar Inverters and Optimizers Grid-Tie and Storage Current Monitoring The MCA1101 products in SOIC-16 package are simple to MPPT Circuit Current Monitoring use with no or minimal external components (other than Central Inverter Current Monitoring decoupling capacitor) enabling fast design, supports high Consumer isolation and are UL/IEC/EN60950-1 certified. Motor Balance and Remote Device Monitoring Home Automation Control & IOT remote sensing Figure 1 - Application circuit Information furnished by ACEINNA is believed to be accurate and reliable. However, no responsibility is assumed by ACEINNA for its use, or for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of ACEINNA. ACEINNA reserves the right to change this specification without notification. ORDERING PART NUMBER Ordering Current VCC Dielectric Qty per Part Marking Gain Package (See Page 12) Part Number Range (Typical) Strength Reel MCA1101-5-5 MCA11055 5 Amp Fixed 5.0V 4800V 16 Lead SOIC 1000 pcs MCA1101-20-5 MCA11205 20 Amp Fixed 5.0V 4800V 16 Lead SOIC 1000 pcs MCA1101-50-5 MCA11505 50 Amp Fixed 5.0V 4800V 16 Lead SOIC 1000 pcs Note: Evaluation boards are available for each product version (order EVB-MCx1101-xx-x) PIN DESCRIPTION Pin Name Description 16L SOIC 1,2,3,4 IP+ Input of Primary Current Path for Sensing, Fused internally 5,6,7,8 IP- Output of Primary Current Path for Sensing, Fused internally 9 Overcurrent FAULTB open drain output. Active low. FAULTB 10 VCC System Power Supply 11 GND Recommended to connect to ground 12 Vout Analog Output Signal linearly proportional to Primary Path Current 13 Vref Zero Current Analog Reference Output Pin 1 Used during initial factory calibration. This pin should be 14 GND connected to ground or left floating during normal operation. 16-pin SOIC 15 GND Connect to ground Input pin. Voltage on this pin defines the overcurrent detection 16 VOC OCD threshold level. Briefly driving this pin to VCC resets and re- arms OCD circuit. BLOCK DIAGRAM Figure 2 - Block diagram for fixed gain output products Phone: 978.965.3200 Fax: 978.965.3201 E-mail: info aceinna.com www.aceinna.com Document: 6020-1102-01 Rev E Page 2 of 13