MTLT110S-R Static Tilt Sensor Module The ACEINNA MTLT110S-R series is a static tilt sensor with programmable tilt threshold alarm and RS232 Interface. The MTLT110S R integrates highly reliable MEMS inertial sensors, microprocessor, and algorithms to compute tilt angles under static o conditions to achieve a 1 accuracy over a broad range of operating environments. The MTLT110S-R also includes a programmable tilt alarm for tilt safety applications. It can be programmed to be triggered to go active high when the tilt exceeds a specified threshold. The tilt alarm can be used to lock out controls or trigger an alarm or warning light. It is an all-in-one tilt safety solution eliminating the need for an external microprocessor to interpret tilt angles. The MTLT110S-R also includes a standard RS232 communication port to digitally sample the real-time angles. MTLT110S-R is available in a fully enclosed IP67 plastic enclosure. Applications Features Construction (boom tilt measurement) High Performance 3 axis MEMS Safety control systems for static Forklifts and Aerial Lifts Sensors Equipment lockout for unsafe tilted environments Platform Leveling 1 accuracy in static conditions Robotics Control Programmable Tilt Alarm RS232 Interface Miniature IP67 enclosure (54 x 40 x 15 mm) Wide Temp Range, -40C to +70C High Reliability, MTBF > 50k hours Tilt Safety ITAR- Free Aerial Lift Safety Platform Leveling i n f o a c e i n n a . c o m w w w . a c e i n n a . c o m 6 0 2 0 - 3 8 4 0 - 0 1 Document P/N: 6020-3840-01MTLT110S-R Static Tilt Sensor Module Performance Characteristics Ta = 25C, VDC = 15.0V, unless otherwise stated Sensor Performance Axes Pitch, Roll Range 90, 180 Resolution 0.05 1 Static Accuracy 1.0 Programmable Tilt Alarm Vout (V) 3.3 Bandwidth(Hz) 5 - 50 (User Configurable) Electrical Input Voltage (V) 9 to 32 ower Consumption (mW) < 400 Interface RS232 Environment o Operating Temperature ( C) -40 C to 70C Non-Operating Temperature o ( C) -55 C to 85 Physical Enclosure Plastic Size (mm) 54 x 40 x 15 Protection Class IP67 Pin Out Description Tools and Support Pin Number Flying Lead Color Pin Description 1 Red Power 2 Black GND NAV-VIEW provides an easy to use graphical 3 Brown GND interface to display, record, playback, and analyze 4 Orange RS232 Tx all of the MTLT110S-R parameters. 5 Green RS232 Rx 6 Yellow Tilt Alarm NAV-VIEW can also be used to set a wide range of user-configurable fields in the MTLT110S-R to Part Ordering Information optimize the system performance for highly MTLT110S-R 1 High Performance Static Tilt Sensor Module dynamic applications. NAV-VIEW software is available for download from ACEINNAs website at: www.aceinna.com/support This product has been developed exclusively for commercial applications. It has not been tested for, and makes no representation or warranty as to conformance with, any military specifications or its suitability for any military application or end-use. Additionally, any use of this product for nuclear, chemical or biological weapons, or weapons research, or for any use in missiles, rockets, and/or UAVs of 300km or greater range, or any other activity prohibited by the Export Administration Regulations, is expressly prohibited without the written consent and without obtaining appropriate US export license(s) when required by US law. Diversion contrary to U.S. law is prohibited. Specifications are subject to change without notice. 1 RMS Error A C E I N N A I n c . w w w . a c e i n n a . c o m 6 0 2 0 - 3 8 4 0 - 0 1