Rev. Feb. 16 Surface Mount ESD Suppressors Surface Mount ESD Suppressor Array, EC1004L4V012AT Application: Antenna circuit DVI USB2.0/3.0 HDMI1.3/1.4 IEEE-1394 Features: Recommended Foot Print Dimensions: Extremely quick response time (<1ns) present ideal ESD Unit Inch mm protection Y 0.024 0.6 Extremely low capacitance (0.1pF typical) G 0.008 0.2 Extremely low leakage current (0.01 A) Z 0.055 1.4 Zero signal distortion X 0.008 0.2 SMD (Surface Mount Device) XL 0.012 0.3 Protection against ESD voltages and currents (IEC61000-4 P 0.020 0.5 -2 Level 4) P1 0.039 1.0 Lead free, RoHS Compliance C 0.031 0.8 Operating temperature -55C ~ +125C Storage temperature range -55C ~ +125C Shape and Dimensions: Size L W T B C D E Inch/(mm) 1004 0.0980.004 0.0390.004 0.0200.004 0.0080.004 0.0120.002 0.0080.002 0.0200.002 (2510) (2.50.1) (1.00.1) (0.50.1) (0.20.1) (0.30.05) (0.20.05) (0.50.05) Circuit Symbol: Pin Description 1,2,4,5 Data Lines Data Lines 6,7,9,10 (No Internal Connection) 3,8 Ground Storage Conditions: Packaging Information: Storage Time: 12 months max Package Tape & Reel Quantity (piece) Storage Temperature : 5C to 30C Relative Humidity: < 60% RH 1004 (2510) 5,000 Website: www.aemchina.com & www.aemcomponents.com 70 Rev. Feb. 16 Surface Mount ESD Suppressors Surface Mount ESD Suppressor Array, EC1004L4V012AT Electrical Characteristics ( 25C): Characteristic Value IEC61000-4-2 Direct Discharge Level 4 - 10 kV IEC61000-4-2 Air Discharge Level 4 - 15 kV Trigger Voltage 300 V typical (measured per IEC61000-4-2, 8kV Direct Discharge) Clamping Voltage 30 V typical (measured per IEC61000-4-2, 8kV Direct Discharge) Response Time Less than 1 ns Capacitance f = 1MHz 0.1 pF typical Leakage Current 12 V 0.01 A max. DC Rated Voltage 12 V max. DC ESD Pulse Withstand 1000 Pulses typical Fig. 1 Fig. 1 Dynamic resistance with positive clamping voltage Eye Diagram (HDMI 1.3) t = 100ns Transmission Line Pulse (TLP) p Fig. 3 Insertion loss typical value Website: www.aemchina.com & www.aemcomponents.com 71