Data Sheet LAN-1 Lan Cable Tester The Amprobe LAN-1 Cable Tester is designed for testing opens, shorts and miswired cable installations. It is designed to work with various data cables and connectors. This cable tester provides a quick go / no-go LED display of the wiring and connection of item under test. You can either step through the test cable wiring one at a time or have the unit automatically pulse through the pin-outs and display the results. Test pin configuration for: 10/100 base -T cable 10 base-2 cable RJ45 modular cables AT&T 258A cable EIA / TIA 568A/568B cables Token Ring Cable No hassle Verify the cable wiring for continuity, opens, shorts or warranty incorrect wiring Test installed cable on wall plate or the patch panels by No waiting. using the Remote Termination module No shipping charges. Perform Loopback Test or Remote Test Our commitment to Buzzer sound warning for error condition in cable high-quality products Two sets of LED lights for Source and Test indication and customer service is demonstrated by Maximum line length: > 300 meters our industry exclusive Connector types: RJ45, BNC No Hassle warranty. In the unlikely event Unit ships with Remote Terminator, 1 ea RJ45 to female that an Amprobe Test BNC cable, 1 ea RJ45 to male BNC cable, 1 ea 1 RJ45 to Tool requires warranty RJ45 cable, 1 ea female BNC to female BNC connector, service, any of our local dealers are 9 volt battery and Users Manual authorized to replace it, on the spot. (note: 500 MSLP limit) Amprobe Test Tools www.Amprobe.comData Sheet LAN-1 Lan Cable Tester Specifications General Specifications Display 18 LEDs: 9 Red and 9 Green, 9 LEDs on Remote module Battery Standard 9-volt battery, NEDA 1604A, JIS 006P, IEC 6F22 Battery life Approx 20 hours. (Alkaline battery) Low Battery Indicator The LED indicator will not turn ON when BATT button is pushed Operating environment 0 to 40C (32 to 104F), 10 to 70% RH Storage temperature -10 to 60C (14 to 140F), 10 to 90% RH Altitude 2000m, indoor operation Dimensions 130 x 56 x 38 mm (5.1 x 2.2 x 1.5 in.) Weight 1.26 kg (0.6 lb) Cable Continuity Maximum line length > 300 meters Connector types RJ45, BNC Agency Approvals & Certifications CE - EMC Conforms to EN61326-1. This product complies with requirements of the following European Commu- nity Directives: 89/336/EEC (Electromagnetic Compatibility) and 73/23/EEC (Low Voltage) as amended by 93/68/EEC (CE Marking). However, electrical noise or intense electromagnetic fields in the vicinity of the equipment may disturb the measurement circuit. Measuring instruments will also respond to unwanted signals that may be present within the measurement circuit. Users should exercise care and take appropriate precautions to avoid misleading results when making measurements in the presence of electronic interference. Amprobe Test Tools Amprobe Test Tools Europe website: www.Amprobe.com Amprobe Test Tools Europe email: info amprobe.com Beha-Amprobe GmbH Everett, WA 98203 In den Engematten 14 Tel: 877-AMPROBE 79286 Glottertal, Germany 2008 Amprobe Test Tools. All rights reserved. Tel.: +49 (0) 7684 8009 - 0 7/2008 3358131 Rev A Amprobe Test Tools www.Amprobe.com