MAX15006CATT+T Analog Devices

MAX15006/MAX15007 40V, Ultra-Low Quiescent-Current Linear Regulators in 6-Pin TDFN/8-Pin SO General Description Features Wide Operating Input Voltage Range (4V to 40V) The MAX15006/MAX15007 ultra-low quiescent-current linear regulators are ideal for use in automotive and Guaranteed 50mA Output Current battery-operated systems. These devices operate from an Low Quiescent Current input voltage of 4V to 40V, deliver up to 50mA of output 10A (No Load) and 90A (Full Load) current, and consume only 10A of quiescent current at Operates Through Cold-Crank Condition no load. The internal p-channel pass device keeps the Withstands 45V Load Dump quiescent current low even at full load. The MAX15007 Low Dropout Voltage of 300mV consumes only 3A current when in shutdown. (MAX15006B/MAX15007B) The MAX15006A/MAX15007A have a fixed 3.3V output Stable Operation with Tiny 2.2F Output Capacitor while the MAX15006B/MAX15007B have a fixed 5V Enable Input (MAX15007) output voltage. The MAX15006C/MAX15007C feature Preset 3.3V and 5.0V Output Voltages an adjustable output from 1.8V to 10V. The MAX15007 1.8V to 10V Adjustable Output (MAX15006C/ includes an enable input to turn the device on or off. All MAX15007C) devices are short-circuit protected and include thermal Thermal and Short-Circuit Protection shutdown. -40C to +125C Operating Temperature Range The MAX15006/MAX15007 operate over the -40C to Thermally Enhanced 3mm x 3mm 6-Pin TDFN/ +125C automotive temperature range. These devices 8-Pin SO Packages are available in space-saving 3mm x 3mm 6-pin TDFN and 8-pin SO thermally enhanced packages. Ordering Information PIN- TOP Applications PART TEMP RANGE PACKAGE MARK Automotive MAX15006AASA+ -40C to +125C 8 SO-EP* Tire-Pressure Monitoring Industrial MAX15006AASA/V+ -40C to +125C 8 SO-EP* Telecom MAX15006AATT+ -40C to +125C 6 TDFN-EP* APE Networking MAX15006AATT/V+ -40C to +125C 6 TDFN-EP* AUR +Denotes a lead(Pb)-free/RoHS-compliant package. /V denotes an automotive qualified part. *EP = Exposed pad. Ordering Information continued at end of data sheet. Pin Configurations TOP VIEW OUT OUT (FB) GND 6 5 4 + MAX15006A IN 1 8 OUT MAX15006B MAX15006A N.C. 2 7 N.C. (FB) MAX15006C MAX15006B MAX15006C N.C. 3 6 N.C. EP + EP N.C. 4 5 GND 1 2 3 SO IN IN N.C. TDFN ( ) FOR MAX15006C ONLY. Pin Configurations continued at end of data sheet. 19-0663 Rev 8 3/15MAX15006/MAX15007 40V, Ultra-Low Quiescent-Current Linear Regulators in 6-Pin TDFN/8-Pin SO Absolute Maximum Ratings IN to GND ..............................................................-0.3V to +45V Operating Temperature Range ......................... -40C to +125C EN to GND ............................................................-0.3V to +45V Junction Temperature ......................................................+150C OUT, FB to GND ...................................................-0.3V to +12V Storage Temperature Range ............................ -65C to +150C OUT Short-Circuit Duration .......................................Continuous Lead Temperature (soldering, 10s) .................................+300C Maximum Current Into Any Pin (except IN and OUT) ......50mA Soldering Temperature (reflow) .......................................+260C Continuous Power Dissipation (T = +70C) A TDFN (derate 23.8mW/C above +70C) ..................1904mW SO (derate 18.90mW/C above +70C) ...............1509.40mW Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. (Note 1) Package Thermal Characteristics TDFN SO Junction-to-Ambient Thermal Resistance ( ) ..........42C/W Junction-to-Ambient Thermal Resistance ( ) ..........53C/W JA JA Junction-to-Case Thermal Resistance ( ) .................9C/W Junction-to-Case Thermal Resistance ( ) .................7C/W JC JC Note 1: Package thermal resistances were obtained using the method described in JEDEC specification JESD51-7, using a four-layer board. For detailed information on package thermal considerations, refer to www.maximintegrated.com/thermal-tutorial. Electrical Characteristics (V = 14V, I = 1mA, C = 0.1F, C = 2.2F, T = T = -40C to +125C, unless otherwise noted. Typical specifications are a IN OUT IN OUT A J T = +25C.) (Note 2) A PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS Input Voltage Range V 4 40 V IN I = 0A (MAX15006A/B/D) 10 17 OUT I = 0A (MAX15006C) 8 15 OUT I = 0A (MAX15007A/B) 11 18 OUT I = 0A (MAX15007C) 9 16 OUT I = 100A (MAX15006A/ OUT 10.5 18 B/D) I = 100A (MAX15006C) 8.5 16 OUT I = 100A (MAX15007A/B) 11.5 19 Regulator on, OUT Ground Current I A GND measured at GND I = 100A (MAX15007C) 9.5 17 OUT I = 1mA (MAX15006A/B/D) 12 20 OUT I = 1mA (MAX15006C) 10 18 OUT I = 1mA (MAX15007A/B) 13 21 OUT I = 1mA (MAX15007C) 11 19 OUT I = 50mA (MAX15006) 90 150 OUT I = 50mA (MAX15007) 93 150 OUT I = 60mA (MAX15006D) 110 150 OUT Shutdown Supply Current I Regulator off (MAX15007 only) 3 5 A SHDN Maxim Integrated 2 www.maximintegrated.com