Model 1P603AS Rev B Hybrid Couplers 3 dB, 90 Description The 1P603AS is a low profile, high performance 3dB hybrid coupler in an easy to use, manufacturing friendly surface mount package. It is designed for W-LAN and MMDS applications. The 1P603AS is designed for balanced amplifiers, variable phase shifters and attenuators, LNAs, signal distribution and is an ideal solution for the ever-increasing demands of the wireless industry for smaller printed circuit boards and high performance. Parts have been subjected to rigorous qualification testing and they are manufactured using materials with coefficients of thermal expansion (CTE) compatible with common substrates such as FR4, G-10, RF-35, RO4003 and polyimide. Produced with 6 of 6 RoHS compliant tin immersion finish. ELECTRICAL SPECIFICATIONS** Features: Frequency Isolation Insertion Loss VSWR 2330-2700 MHz MHz dB Min dB Max Max:1 W-LAN and MMDS 1.20 Low Loss 2300-2700 20 0.30 High Isolation Amplitude Operating 90 Quadrature Phase Balance Power Balance Temp. Surface Mountable Ave. CW Watts dB Max Degrees C Tape And Reel 85C Lead Free 0.25 3 25 -55 to +140 100% Tested **Specification based on performance of unit properly installed on microstrip printed circuit boards with 50 nominal impedance. Specifications subject to change without notice. Outline Drawing Dimensions are in Inches Millimeters Part is Symmetric About All Axis 1P603AS Mechanical Outline Tolerances are Non-Cumulative USA/Canada: (315) 233-5510 Available on Tape Toll Free: (833) 389-6402 and Reel For Pick and Europe: +44 2392-232392 Place Manufacturing. Asia: +86 512 62749282 Mode l 1P603AS Rev B Hybrid Coupler Pin Configuration The 1P603AS has an orientation marker to denote Pin 1. Once port one has been identified the other ports are known automatically. Please see the chart below for clarification: Configuration Pin 1 Pin 2 Pin 3 Pin 4 Splitter Input Isolated -3dB 90 -3dB Splitter Isolated Input -3dB -3dB 90 Splitter Input Isolated -3dB 90 -3dB Splitter Isolated Input -3dB -3dB 90 *Combiner Isolated Output A 90 A *Combiner Output Isolated A A 90 *Combiner Isolated Output A 90 A *Combiner Output Isolated A A 90 *Notes: A is the amplitude of the applied signals. When two quadrature signals with equal amplitudes are applied to the coupler as described in the table, they will combine at the output port. If the amplitudes are not equal, some of the applied energy will be directed to the isolated port. The actual phase, , or amplitude at a given frequency for all ports, can be seen in our de- embedded s-parameters, that can be downloaded at www.anaren.com. USA/Canada: (315) 233-5510 Available on Tape and Toll Free: (833) 389-6402 Reel For Pick and Place Europe: +44 2392-232392 Manufacturing. Asia: +86 512 62749282