X2BS Anaren

Model X2BS Rev C PRELIMINARY SMT Crossover Description The X2BS is a low profile crossover to intersect an RF and RF circuit trace in an easy to use surface mount package designed for frequencies up to 6 GHz. The X2BS is ideal for any application where an RF circuit must intersect with another RF circuit without resorting to a multilayer PCB. Parts have been subjected to rigorous qualification testing and units are 100% tested. They are manufactured using materials with x and y thermal expansion coefficients compatible with common substrates such as FR4, G-10, RF-35, RO4003 and polyimide. Produced with 6 of 6 RoHS compliant tin immersion finish. Electrical Specifications ** Features: Frequency Port Impedance Return Loss Isolation DC 6.0 GHz GHz Ohms dB Min DB Min RF RF Crossover DC 2.5 50 20 50 Low Loss 2.5 3.5 50 18 30 High Isolation 3.5 6.0 50 15 20 Surface Mountable Insertion Operating Tape And Reel Power JC Loss Temp. Convenient Package dB Max Watts C / Watt C 100% Tested 0.05 30 143.4 -55 to +85 Lead Free 0.10 15 143.4 -55 to +85 0.20 10 143.4 -55 to +85 **Specification based on performance of unit properly installed on microstrip printed circuit boards with 50 nominal impedance. Specifications subject to change without notice. Mechanical Outline Top View (Near-side) Side View Bottom View (Far-side) .010 .200 .007 0.25 .071 5.08 0.18 1.80 .004 .020 TYP RF IN/OUT 0.10 0.51 4X GND RF IN/OUT RF IN/OUT GND .010 .200 .008 RF IN/OUT .025 0.25 5.08 RF IN/OUT 0.20 0.65 RF IN/OUT RF IN/OUT RF IN/OUT .004 .056 0.10 1.42 .008 .072 Dimensions are in Inches Millimeters 0.20 1.83 X2B Rev A Mechanical Outline USA/Canada: (315) 432-8909 Available on Tape and Reel for Pick and Toll Free: (800) 411-6596 Place Manufacturing. +44 2392-232392 Europe: Model X2BS Rev C Insertion Loss and Power Derating Curves Insertion Loss Derating: Power Derating: The insertion loss, at a given frequency, of a group of The power handling and corresponding power derating couplers is measured at 25 C and then averaged. The plots are a function of the thermal resistance, mounting surface temperature (base plate temperature), measurements are performed under small signal conditions (i.e. using a Vector Network Analyzer). The maximum continuous operating temperature of the coupler, and the thermal insertion loss. The thermal process is repeated at 85 C and 150 C. A best-fit line insertion loss is defined in the Power Handling section of for the measured data is computed and then plotted the data sheet. from -55C to 150C. As the mounting interface temperature approaches the maximum continuous operating temperature, the power handling decreases to zero. If mounting temperature is greater than 95 C, Xinger Crossover will perform reliably as long as the input power is derated to the curve above. USA/Canada: (315) 432-8909 Available on Tape and Reel for Pick and Place Toll Free: (800) 411-6596 Manufacturing. Europe: +44 2392-232392