Model X3C07F1-03S Rev D PRELIMINARY Hybrid Coupler 3 dB, 90 Description The X3C07F1-03S is a low profile, high performance 3dB hybrid coupler in a new easy to use, manufacturing friendly surface mount package. It is designed for AMPS, GSM, WCDMA and LTE band applications. The X3C07F1-03S is designed particularly for balanced power and low noise amplifiers, plus signal distribution and other applications where low insertion loss and tight amplitude and phase balance is required. It can be used in high power applications up to 25 watts. Parts have been subjected to rigorous qualification testing and they are manufactured using materials with coefficients of thermal expansion (CTE) compatible with common substrates such as FR4, G-10, RF-35, RO4003 and polyimide. Produced with 6 of 6 RoHS compliant tin immersion finish. Electrical Specifications ** Features: Insertion Amplitude Frequency Isolation VSWR 600-1000 MHz Loss Balance MHz dB Min dB Max Max : 1 dB Max AMPS, GSM, WCDMA & LTE 700-1000 23 0.25 1.15 0.60 High Power 600-900 23 0.17 1.15 0.70 Very Low Loss 695-805 26 0.15 1.12 0.35 Tight Amplitude Balance 731-881 26 0.17 1.12 0.50 High Isolation 758-960 23 0.25 1.15 0.45 Production Friendly Operating Tape and Reel Group Delay Phase Power JC Temp. Lead-Free Avg. CW Watts ns Degrees C/Watt C at 95 C 0.24 0.04 90 4.0 25 45.6 -55 to +140 0.24 0.04 90 3.0 25 45.6 -55 to +140 0.24 0.04 90 4.0 25 45.6 -55 to +140 0.24 0.04 90 4.0 25 45.6 -55 to +140 0.24 0.04 90 4.0 25 45.6 -55 to +140 **Specification based on performance of unit properly installed on Anaren Test Board with small signal applied. Specifications subject to change without notice. Refer to parameter definitions for details. Mechanical Outline X3C 07F1-03S RR CC USA/Canada: (315) 432-8909 Available on Tape and Reel for Pick and Toll Free: (800) 411-6596 Place Manufacturing. +44 2392-232392 Europe: Model X3C 07F1-03S Rev D Hybrid Coupler Pin Configuration The X3C07F1-03S has an orientation marker to denote Pin 1. Once port one has been identified the other ports are known automatically. Please see the chart below for clarification: Configuration Pin 1 Pin 2 Pin 3 Pin 4 Splitter Input Isolated -3dB 90 -3dB Splitter Isolated Input -3dB -3dB 90 Splitter Input Isolated -3dB 90 -3dB Splitter Isolated Input -3dB -3dB 90 *Combiner Isolated Output A 90 A *Combiner Output Isolated A A 90 *Combiner Isolated Output A 90 A *Combiner Output Isolated A A 90 *Notes: A is the amplitude of the applied signals. When two quadrature signals with equal amplitudes are applied to the coupler as described in the table, they will combine at the output port. If the amplitudes are not equal, some of the applied energy will be directed to the isolated port. The actual phase, , or amplitude at a given frequency for all ports, can be seen in our de-embedded s- parameters, that can be downloaded at www.anaren.com. USA/Canada: (315) 432-8909 Available on Tape and Reel for Pick and Place Toll Free: (800) 411-6596 Manufacturing. Europe: +44 2392-232392