Model X3C22E3-03S Rev E Hybrid Coupler 3 dB, 90 Description The X3C22E3-03S is a low profile, high performance 3dB hybrid coupler in a new easy to use, manufacturing friendly surface mount package. It is designed for DCS and PCS band applications. The X3C22E3-03S is designed particularly for balanced power and low noise amplifiers, plus signal distribution and other applications where low insertion loss and tight amplitude and low PIM are required. It can be used in high power applications up to 300 watts. Parts have been subjected to rigorous qualification testing and they are manufactured using materials with coefficients of thermal expansion (CTE) compatible with common substrates such as FR4, G-10, RF-35, RO4350 and polyimide. Electrical Specifications ** Features: Insertion Amplitude Frequency Isolation VSWR Loss Balance MHz dB Min dB Max Max : 1 dB Max 1800-2700 MHz DCS and PCS 1800-2200 25 0.12 1.15 0.3 1800-2700 23 0.15 1.15 0.3 High Power Very Low Loss Breakdown Operating Phase Power Tight Amplitude Balance Voltage Temp. High Isolation Avg. CW Degrees (Peak Power) Watts 110 C Production Friendly C Tape and Reel 1.5kV min 90 2.0 300 -55 to +150 Tin immersion (65dBm) 90 4.0 RoHS compliant finish 250 -55 to +150 **Specification based on performance of unit properly installed on Anaren Test Board with small signal applied. Specifications are subject to change without notice. Refer to parameter definitions for details. Mechanical Outline USA/Canada: (315) 432-8909 Available on Tape and Reel for Pick and Toll Free: (800) 411-6596 Place Manufacturing. +44 2392-232392 Europe: Mode l X3C22E3-03S Rev E Hybrid Coupler Pin Configuration The X3C22E3-03S has an orientation marker to denote Pin 1. Once port one has been identified the other ports are known automatically. Please see the chart below for clarification: Configuration Pin 1 Pin 2 Pin 3 Pin 4 Splitter Input Isolated -3dB 90 -3dB Splitter Isolated Input -3dB -3dB 90 Splitter Input Isolated -3dB 90 -3dB Splitter Isolated Input -3dB -3dB 90 *Combiner Isolated Output A 90 A *Combiner Output Isolated A A 90 *Combiner Isolated Output A 90 A *Combiner Output Isolated A A 90 *Note: A is the amplitude of the applied signals. When two quadrature signals with equal amplitudes are applied to the coupler as described in the table, they will combine at the output port. If the amplitudes are not equal, some of the applied energy will be directed to the isolated port. USA/Canada: (315) 432-8909 Available on Tape and Reel for Pick and Place Toll Free: (800) 411-6596 Manufacturing. Europe: +44 2392-232392