Model X3C25F1-03S Rev G PRELIMINARY Hybrid Coupler 3 dB, 90 Description The X3C25F1-03S is a low profile, high performance 3dB hybrid coupler in a new easy to use, manufacturing friendly surface mount package. It is designed for LTE, WIMAX applications. The X3C25F1-03S is designed particularly for balanced power and low noise amplifiers, plus signal distribution and other applications where low insertion loss and tight amplitude and phase balance is required. It can be used in high power applications up to 25 watts. Parts have been subjected to rigorous qualification testing and they are manufactured using materials with coefficients of thermal expansion (CTE) compatible with common substrates such as FR4, G-10, RF-35, RO4003 and polyimide. Produced with 6 of 6 RoHS compliant tin immersion finish Electrical Specifications ** Features: Insertion Amplitude Frequency Isolation VSWR Loss Balance 2300-2700 MHz LTE, WIMAX MHz dB Min dB Max Max : 1 dB Max High Power 2100-2300 18 0.20 1.29 0.45 Very Low Loss 2300-2700 20 0.20 1.22 0.30 Tight Amplitude Balance 2630-2690 24 0.20 1.15 0.30 High Isolation Operating Production Friendly Phase Group Delay Power JC Temp. Tape and Reel Avg. CW Watts Lead-Free Degrees ns C/Watt C at 95 C 90 4.0 0.13 0.04 25 57.04 -55 to +140 90 4.0 57.04 0.13 0.04 25 -55 to +140 90 4.0 57.04 0.13 0.04 25 -55 to +140 **Specification based on performance of unit properly installed on Anaren Test Board with small signal applied. Specifications subject to change without notice. Refer to parameter definitions for details. Mechanical Outline X3C 25F1-03S RR CC USA/Canada: (315) 432-8909 Available on Tape and Reel for Pick and Toll Free: (800) 411-6596 Place Manufacturing. +44 2392-232392 Europe: Model X3C25F1-03S Rev G Hybrid Coupler Pin Configuration The X3C25F1-03S has an orientation marker to denote Pin 1. Once port one has been identified the other ports are known automatically. Please see the chart below for clarification: Configuration Pin 1 Pin 2 Pin 3 Pin 4 Splitter Input Isolated -3dB 90 -3dB Splitter Isolated Input -3dB -3dB 90 Splitter Input Isolated -3dB 90 -3dB Splitter Isolated Input -3dB -3dB 90 *Combiner Isolated Output A 90 A *Combiner Output Isolated A A 90 *Combiner Isolated Output A 90 A *Combiner Output Isolated A A 90 *Notes: A is the amplitude of the applied signals. When two quadrature signals with equal amplitudes are applied to the coupler as described in the table, they will combine at the output port. If the amplitudes are not equal, some of the applied energy will be directed to the isolated port. The actual phase, , or amplitude at a given frequency for all ports, can be seen in our de-embedded s- parameters, that can be downloaded at www.anaren.com. USA/Canada: (315) 432-8909 Available on Tape and Reel for Pick and Place Toll Free: (800) 411-6596 Manufacturing. Europe: +44 2392-232392