Model X3DC09E2S RevC Doherty Combiner b Description The X3DC09E2S is a low profile, high performance Doherty Combiner in a new easy to use, manufacturing friendly surface mount package. The X3DC09E2S is designed particularly for Doherty Amplifier applications, where tightly controlled phase and amplitude imbalance as well as low insertion loss are required for maximum and low power condition. It can be used in high power applications up to 200 watts. Parts have been subjected to rigorous qualification testing and they are manufactured using materials with coefficients of thermal expansion (CTE) compatible with common substrates such as FR4, G-10, RF-35, RO4350 and polyimide. Produced with 6 of 6 RoHS compliant tin immersion finish Electrical Specifications ** Features: Phase Return Insertion Amplitude Frequency Imbalance 920 - 960 MHz 1 1 1 Loss Loss Imbalance 1 High Power MHz dB Min dB Max dB Max Degrees Low Amp Imbalance Very Low Loss 920 960 20 0.15 0.12 90 3.0 Production Friendly Return Loss Insertion Port Operating Tape and Reel Power 2 2 3 Loss Extension Temp. Lead Free dB Min dB Max Degrees Avg. CW Watts C 20 0.25 3 200 -55 to +150 **Specification based on performance of unit properly installed on Anaren Test Board 1 At maximum power condition, Doherty combiner functions as an equal-split power combiner. 2 At low power condition, Doherty combiner functions as a 100 to 50 impedance transformer. 3 There are short 50 ohm lines associated with input ports of 3 at 940MHz. Details in page 2. Mechanical Outline USA/Canada: (315) 233-5510 Available on Tape Toll Free: (833) 389-6402 and Reel for Pick and Europe: +44 2392-232392 Place Manufacturing. Asia: +86 512 62749282 90 50 90 50 Mode l X3DC09E2S RevC Doherty Amplifier Configuration Offset line 0 RF output RF input Main Amp 90 NC 35 90 Peak Amp Anaren Doherty Port Extension 50 Doherty Combiner Pin Configuration The X3DC09E2S has an orientation marker to denote Pin 1. Once port one has been identified the other ports are known automatically. Please see the chart below for clarification: Pin 1 Pin 4 50 90 Pin 3 Pin 2 35 50 Pin 1 Pin 2 Pin 3 Pin 4 Combining Port Not Used Peak Amp Port Main Amp Port There are inevitably short lines associating with input ports in some high frequency band parts. The length of the short line is specified as electrical length at center frequency and noted as port extension in this datasheet. The designer should take this length into the consideration to optimize the offset line length. USA/Canada: (315) 233-5510 Available on Tape and Toll Free: (833) 389-6402 Reel for Pick and Place Europe: +44 2392-232392 Manufacturing. Asia: +86 512 62749282