X4C35J1-03G Anaren

Model X4C35J1-03G Rev D Ultra Low Profile 0805 3dB Hybrid Coupler Description The X4C35J1-03G is a low profile, high performance 3dB hybrid coupler in a new easy to use, manufacturing friendly surface mount package. It is designed for 5G applications. The X4C35J1-03G is available on tape and reel for pick and place high volume manufacturing. All of the Xinger components are constructed from ceramic filled PTFE composites, which possess excellent electrical and mechanical stability. All parts have been subjected to rigorous qualification testing and units are 100% RF tested. Produced in an ENIG final finish. Electrical Specifications ** Features: Insertion Return Amplitude Frequency Isolation Loss Loss Balance 3100-4200 MHz 5G Applications MHz dB Min dB Max dB Min dB Max Very Low Loss 3100-4200 20 0.5 20 0.5 Tight Amplitude Balance Group Operating High Isolation Phase Power Delay Temp. Production Friendly Avg. CW Watts Tape and Reel Degrees Max nS C o 105 C 90 4 0.07 5 -55 to +140 **Specification based on performance of unit properly installed on Anaren Test Board with small signal applied. *Specifications subject to change without notice. Refer to parameter definitions for details. Mechanical Outline Side View Top View Bottom View .65.07 4x .37 2.04.10 1 GND 2 6x .15 1.29.10 3x .98 4x .22 Orientation Mark Orientation Mark 4 3 4x .65 Denotes Pin 1 Location Denotes Pin 1 Location 5x .30 -Dimensions are in Millimeters -Tolerances are Non-Cumulative USA/Canada: (315) 233-5510 Available on Tape and Toll Free: (833) 389-6402 Reel for Pick and Place Europe: +44 2392-232392 Manufacturing. Asia: +86 512 62749282 1 Mode l X4C35J1-03G Rev D Hybrid Coupler Pin Configuration The X4C35J1-03G has an orientation marker to denote Pin 1. Once port one has been identified the other ports are known automatically. Please see the chart below for clarification: 3dB Coupler Pin Configuration Configuration Pin 1 Pin 2 Pin 3 Pin 4 Splitter Input Isolated -3dB 90 -3dB Splitter Isolated Input -3dB -3dB 90 Splitter Input Isolated -3dB 90 -3dB Splitter Isolated Input -3dB -3dB 90 *Combiner Isolated Output A 90 A *Combiner Output Isolated A A 90 *Combiner Isolated Output A 90 A *Combiner Output Isolated A A 90 Note: The direct port has a DC connection to the input port and the coupled port has a DC connection to the isolated port. For optimum IL and power handling performance, use Pin 1 or Pin 3 as inputs. USA/Canada: (315) 233-5510 Available on Tape and Toll Free: (833) 389-6402 Reel for Pick and Place Europe: +44 2392-232392 Manufacturing. Asia: +86 512 62749282