Model XC2500A-03S Rev B Hybrid Coupler 3 dB, 90 Description The XC2500A-03S is a low profile, high performance 3dB hybrid coupler in a new easy to use, manufacturing friendly surface mount package. It is designed for WiBro and DMB applications. The XC2500A-03S is designed particularly for balanced power and low noise amplifiers, plus signal distribution and other applications where low insertion loss and tight amplitude and phase balance is required. It can be used in high power applications up to 200 watts. Parts have been subjected to rigorous qualification testing and they are manufactured using materials with coefficients of thermal expansion (CTE) compatible with common substrates such as FR4, G-10, RF-35, RO4350, and polyimide. Produced with 6 of 6 RoHS compliant tin immersion. Electrical Specifications ** Features: Insertion Amplitude Frequency Isolation VSWR Loss Balance 2300-2700 MHz WiBro and DMB MHz dB Min dB Max Max : 1 dB Max High Power 2300-2700 25 0.13 1.14 0.15 Very Low Loss 2300-2400 25 0.10 1.14 0.15 Tight Amplitude Balance 2630-2655 25 0.13 1.14 0.15 High Isolation Operating Production Friendly Phase Power JC Temp. Tape and Reel Degrees Avg. CW Watts C/Watt C Lead-Free Reliable, FIT= 1.016 90 4.0 150 24.6 -55 to +85 90 4.0 200 24.6 -55 to +85 90 4.0 150 24.6 -55 to +85 **Specification based on performance of unit properly installed on Anaren Test Board 58481-0001 with small signal applied. Specifications subject to change without notice. Refer to parameter definitions for details027 .135 3.430.69 .010 .560 4X .040.004 14.220.25 0.10 1.02 Pin 1 Pin 1 Pin 2 Pin 2 GND Orientation .350.010 .004 .220 .004 4X .059 SQ Marker Denotes 0.25 0.10 8.89 5.59 1.500.10 Pin 1 .004 Pin 4 .430 Denotes Pin 3 GND Pin 3 Pin 4 0.10 10.92 Array Number USA/Canada: (315) 432-8909 Available on Tape Toll Free: and Reel for Pick and (800) 411-6596 Place Manufacturing. +44 2392-232392 Europe: Dimensions are in Inches Millimeters XC2500A-03S Mechanical OutlineModel XC2500A-03S Rev B Hybrid Coupler Pin Configuration The XC2500A-03S has an orientation marker to denote Pin 1. Once port one has been identified the other ports are known automatically. Please see the chart below for clarification: Configuration Pin 1 Pin 2 Pin 3 Pin 4 Splitter Input Isolated -3dB 90 -3dB Isolated Input Splitter -3dB -3dB 90 Splitter Input Isolated -3dB 90 -3dB Splitter Isolated Input -3dB -3dB 90 *Combiner Isolated Output 90 A A *Combiner Output Isolated A A 90 *Combiner Isolated Output A 90 A *Combiner Output Isolated A A 90 *Note: A is the amplitude of the applied signals. When two quadrature signals with equal amplitudes are applied to the coupler as described in the table, they will combine at the output port. If the amplitudes are not equal, some of the applied energy will be directed to the isolated port. USA/Canada: (315) 432-8909 Available on Tape and Reel for Pick and Place Toll Free: (800) 411-6596 Manufacturing. Europe: +44 2392-232392