Model XDL15-3-030S Rev B PRELIMINARY Delay Line DESCRIPTION The XDL15-3-030S can be used in amplifier linearization applications from 135 2700Mhz. Small form factor of XDL15-3-030S is ideal for cascading to obtain longer delay. The Xinger delay lines are a low cost, high quality alternative to the traditional coaxial and filter solutions presently available. Parts have been subjected to rigorous qualification testing and units are 100% tested. Produced with 6 of 6 RoHS compliant tin immersion finish. ELECTRICAL SPECIFICATIONS* Features: Return Insertion Power Production Friendly Operating Frequency Loss Loss per ns Group Handling Consistent Delay Temp. (MHz.) (dB) (dB/ns) Delay (nS) (Watt) (C) Stable Over Temperature (min) (max) Surface Mountable Available in Tape & Reel Non-Lead Solder Paste Compatible 1 Lead Free 135-2700 -12 -1.5 2.85 0.30 -55 to +140 100% Tested MSL 2 * Specification based on performance of unit properly installed on Anaren Test Board 66111-0001. * Specifications subject to change without notice. Refer to parameter definitions for details. Mechanical Outline USA/Canada: (315) 432-8909 Available on Tape and Reel For Pick and Toll Free: (800) 544-2414 Place Manufacturing. +44 2392-232392 Europe: Model XDL15-3-030S Rev B PRELIMINARY PIN CONFIGURATION Pin 1 Pin 2 Pin 3 Pin 4 DNC- Do not connect, DNC- Do not connect, Input Output Do not ground Do not ground DNC- Do not connect, DNC- Do not connect, Output Input Do not ground Do not ground TYPICAL PERFORMANCE: 100 MHz to 6000 MHz Return Loss 1 XDL15-3-030S (OVERTEMP) Return Loss 2 XDL15-3-030S (OVERTEMP) 0 0 -55C -55C 25C 25C 85C 85C -10 -10 125C 125C -20 -20 -30 -30 -40 -40 -50 -50 100 700 1300 1900 2500 3100 3700 4300 4900 5500 100 700 1300 1900 2500 3100 3700 4300 4900 5500 Frequency (MHz) Frequency (MHz) Group DealyXDL15-3-030S (OVERTEMP) Insertion Loss XDL15-3-030S (OVERTEMP) 4 0 -55C -55C 3.8 -0.5 25C 25C 85C 85C 3.6 -1 125C 125C -1.5 3.4 3.2 -2 -2.5 3 -3 2.8 2.6 -3.5 2.4 -4 2.2 -4.5 2 -5 100 700 1300 1900 2500 3100 3700 4300 4900 5500 100 700 1300 1900 2500 3100 3700 4300 4900 5500 Frequency (MHz) Frequency (MHz) CASCADING XDL15-3-030S If more than 3ns delay is needed, cascading XDL15-3-030S can provide group delay of 6ns, 9ns and 12ns. Gap of 2mm between the cascaded parts is recommended with solder mask in between. USA/Canada: (315) 432-8909 Available on Tape and Reel For Pick and Place Toll Free: (800) 544-2414 Manufacturing. Europe: +44 2392-232392 Return Loss 1(dB) Group Delay(ns) Insertion Loss (dB) Return Loss 2(dB)